HPE FlexNetwork HSR6800 Configuration Manual page 173

Interface: GigabitEthernet2/1/1
State: Up
# Display information about IS-IS interfaces of Router A.
[RouterA] display isis interface
Interface: GigabitEthernet2/1/1
Id IPV4.State
001 Up
# Display IS-IS interfaces of Router C.
[RouterC] display isis interface
Interface: GigabitEthernet2/1/1
Id IPV4.State
001 Up
# Display information about IS-IS interfaces of Router D.
[RouterD] display isis interface
Interface: GigabitEthernet2/1/1
Id IPV4.State
001 Up
By using the default DIS priority, Router C is the Level-1 DIS, and Router D is the Level-2 DIS.
The pseudonodes of Level-1 and Level-2 are 0000.0000.0003.01 and 0000.0000.0004.01,
respectively.
Configure the DIS priority of Router A:
3.
[RouterA] interface GigabitEthernet 2/1/1
[RouterA-GigabitEthernet2/1/1] isis dis-priority 100
# Display information about IS-IS neighbors of Router A.
[RouterA] display isis peer
System Id: 0000.0000.0002
Interface: GigabitEthernet2/1/1
State: Up
System Id: 0000.0000.0003
Interface: GigabitEthernet2/1/1
State: Up
System Id: 0000.0000.0002
Interface: GigabitEthernet2/1/1
HoldTime: 23s
Interface information for ISIS(1)
---------------------------------
IPV6.State
Down
Interface information for ISIS(1)
---------------------------------
IPV6.State
Down
Interface information for ISIS(1)
---------------------------------
IPV6.State
Down
Peer information for ISIS(1)
----------------------------
HoldTime: 29s
HoldTime: 22s
161
Circuit Id: 0000.0000.0004.01
Type: L2
MTU Type DIS
1497 L1/L2 No/No
MTU Type DIS
1497 L1/L2 Yes/No
MTU Type DIS
1497 L1/L2 No/Yes
Circuit Id: 0000.0000.0001.01
Type: L1(L1L2)
Circuit Id: 0000.0000.0001.01
Type: L1
Circuit Id: 0000.0000.0001.01
PRI: 64
PRI: 64
PRI: 64