Figure 1-6 Trace Display In Single Enlarged Window In Trigger Delay Mode - Keysight N1911A User Manual

1 Introduction
31
Figure 1-6
Figure 1-6
associated tables and trigger delay.
30 Pressing
31 The selected channel and gate number is displayed.
32 The trigger setting and slope is displayed. Examples shown in
44
Trace display in single enlarged window in trigger delay mode
shows a single enlarged window with the Gate Ctrl menu and
Select TgDel
marker(s). The indicates when the trigger event occurs, whilst
delayed trigger point. When the two points coincide only the
shown.
In the example shown in
trigger delay of –5.00 µs has been configured, placing the measurement
trigger before the trigger event. You can configure the trigger delay by
pressing and entering a numeric value.
To indicate an off-screen trigger event,
off-screen trigger point,
Internal Channel A and a Positive Slope.
removes the gate markers and displays the trigger
Figure 1-6, the
is displayed.
Keysight N1911A/1912A User's Guide
32
30
appears ahead of the
is displayed. To indicate an
Figure 1-6
shows the
trigger is
as a
are