Meter B/W
setting
Figure 2-20
When video bandwidth is set to Off, it removes all digital signal conditioning. This
provides approximately 3 dB roll off at the maximum sensor's bandwidth and is
best suited for accurate trace capture, minimizing overshoot, and removing any
ringing effects caused by the sharp cut-off filters used in the Low, Med and High
settings.
wideband power sensors.
Procedure
Set the video bandwidth as follows:
1 Press
2 Use the
Keysight N1911A/1912A User's Guide
Amplitude
0
-3.5 dB
Approx
5 MHz 15 MHz
Low
Med
High
Off
Band width filter shapes
Figure 2-20
shows the filter shapes associated with the P-Series
. On dual channel meters select the required channel.
and
keys to select the Video B/W setting field.
General Power Meter Functions
P-Series sensors
Frequency
30 MHz
2
85