The Display Layout; Figure 1-1 Dual Numeric Display - Keysight N1911A User Manual

1 Introduction

The Display Layout

Figure 1-1
numeric mode.
Pressing
1
3
4
6
Figure 1-1
1 The status reporting line displays messages and the control status of the
2 The blue highlight on the right hand side of the window shows it is the
3 The measured channel is shown. With a P-Series or an E-Series E9320 power
4 The associated measurement type is shown below the channel and gate
5 This displays the measurement units, either dBm, dB, Watts, or percent (%).
38
shows the display layout when two windows are configured in dual
Disp Type
,
Dual numeric display
power meter. For example, the status can be either RMT (remote, GPIB, USB
or LAN operation) or LCL (local, front panel operation).
The message fields indicate ERR for any error conditions that occur or
informing you to Please Zero the power sensor.
currently selected measurement display line. This measurement line is the
Upper Window/Upper Measurement.
sensor connected, and channel in trigger mode, the associated gate number is
shown.
number.
the other display formats are available.
2
Keysight N1911A/1912A User's Guide
9
8
5
7