Error Messages; Introduction - Keysight N1911A User Manual

10 Maintenance

Error Messages

Introduction

This section contains information about error messages. It explains how to read
the power meter's error queue and lists all error messages and their probable
causes.
When there is a hardware related problem, for example, a power sensor overload,
the error message is displayed on the status line at the top of the display. In
addition, the errors are also written to the error queue. If there are any errors in
the error queue the front panel error indicator is displayed as shown in
Figure
Other errors can also be generated when the power meter is being operated over
the remote interface. These errors also display the error indicator and are written
to the error queue.
Figure 10-2
To read the error queue from the front panel:
– Press
266
10-2.
Error indicator
Error indicator position
,
1 of 2
each error message.
, ,
Service Error List
Keysight N1911A/1912A User's Guide
and use to scroll through
Next