Procedure; Figure 2-18 Meas Avg Count Pop-Up - Keysight N1911A User Manual

Resolution is a measurement display function and not a channel function. In the
case where a channel is set up in both the upper and lower window and the
resolution settings are different, the highest resolution setting is taken to calculate
the averaging number.
These four resolution levels represent:

Procedure

Set measurement averaging as follows:
1 Press
2 Use the
3 Press
If you have selected AUTO or OFF proceed at
proceed as follows:
4 Use the
5 Press
Figure 2-18
Keysight N1911A/1912A User's Guide
– 1, 0.1, 0.01, 0.001 dB respectively if the measurement suffix is dBm or dB.
– 1, 2, 3 or 4 significant digits respectively if the measurement suffix is
W or %.
. On dual channel meters select the required channel. The
current setting is shown in the Meas Avg field (
Channel Setup screen. The default is
and
and use the
key to select the Meas Avg: value field.
to display the Meas Avg Count pop-up.
Meas Avg Count pop-up
AUTO
keys to select the Filter setting field.
and to step through the available settings.
General Power Meter Functions
, MAN, or
AUTO
.
step 7. If you have selected MAN
2
) on the
OFF
79