4
Using E9320 E-Series Power Sensors
Gate Control Press
Gate Control
described in greater details in
page 176".
Viewing the results in a full screen window
Use the
provides a better resolution on the display. You can press
Gate Meas
current settings of the X and Y scale are displayed on the reporting line above the
results. You need to toggle the
Scale settings
Rising edge
Falling edge
Figure 4-10
180
to display the Gate Ctrl menu. Setting the gate features are
"Gate Control in a Single Enlarged Window"
key to display the trace in a full screen window display. This
to display the results as set in Single Enlarged Window mode. The
Pulse width
Trace display in full screen
key to allow the softkeys to be displayed.
Duty cycle
Keysight N1911A/1912A User's Guide
on
or
Trace Meas
Pulse period
Pulse repetitive frequency