Figure 7-4 Calibration Factor Pop-Up Window; Figure 7-5 Calibration Factor Display - Keysight N1911A User Manual

Does this setting match the value for the sensor? (The power sensor reference
calibration factor can normally be found above the calibration factors table on the
power sensor body.)
10 To change the settings, use the
Figure 7-4
11 Press
12 Connect the power sensor to the signal to be measured.
13 The corrected measurement result is displayed.
Figure 7-5
Example
Keysight N1911A/1912A User's Guide
field and press
keypad to enter the required value in the Cal Factor pop-up window.
Calibration factor pop-up window
to complete the entry.
%
Calibration factor display
Using 8480 Series Power Sensors
and
to display the Cal Factor pop-up. Use the numeric
keys to highlight the Cal Fac value
Calibration factor
7
215