Figure 8-8 Sensor Table Selected; Figure 8-9 Frequency Dependent Offset Indicator - Keysight N1911A User Manual

8 Using N8480 Series Power Sensors
Figure 8-8
When no data is contained in the highlighted table, the
NOTE
(grayed out).
3 Press
4 Press
Sensor Table 2 selected
Figure 8-9
5 To change the frequency, press
244
Sensor table selected
to complete the selection of the calibration factor table.
Done
again to display the measurement screen.
Done
offset table is selected.
Frequency dependent offset indicator
highlight the Frequency field.
Table
Figure 8-9
and use the and
Keysight N1911A/1912A User's Guide
key is disabled
shows which
keys to