Selecting A Sensor Calibration Table - Keysight N1911A User Manual

Using N8480 Series Power Sensors 8

Selecting a sensor calibration table

You can select a calibration factor table from the key menu followed by
and .
Tables Sensor Cal Table
The State column indicates if any calibration factor tables are currently selected.
The Sensor Tbls screen is shown in Figure 8-8.
NOTE
You can also view which sensor table is being used by pressing the ,
Offset and use the and keys to highlight the CF Table setting field and
press to display the table.
Procedure
Select sensor calibration table as follows:
1 Press , , .
Tables Sensor Cal Tables
2 Use the and keys to highlight one of the 20 table titles and press
Table
to highlight .
On
Keysight N1911A/1912A User's Guide 243