Figure 2-38 Trigger Level Pop-Up; Figure 2-39 Trigger Delay Pop-Up - Keysight N1911A User Manual

Figure 2-38
Complete the entry by pressing
Delay
The current setting is displayed below the
between the trigger event and all the gate start times. This allows you to
time-shift all the gates by the same amount with one setting change. A delay of
up to 1 second can be entered. To enter or change the setting press
use the numeric keypad to enter the required value in the Trigger Delay pop-up
window to enter the new value.
Figure 2-39
Complete the entry by pressing the required second, millisecond, microsecond or
nanosecond ( ,
The trigger delay time can also be entered or changed in the Trace Display mode
NOTE
when the Gate Control menu is displayed. See
page 152 for further detail.
Press
Keysight N1911A/1912A User's Guide
Trigger Level pop-up
Trigger Delay pop-up
, or
s ms μs
to display the second menu page.
1 of 2
General Power Meter Functions
.
dBm
Delay
) softkey.
ns
"Setting the Trace Display"
label. The delay time is applied
Delay
2
and
on
99