Figure 4-8 Trace Display With Trigger Delay Menu - Keysight N1911A User Manual

Using E9320 E-Series Power Sensors 4
Gate
Pressing scrolls through the 4 gates available for each channel. The gate
Gate
displayed is highlighted below the softkey. It is also displayed in the
Gate
channel/gate annotation in the top left of the screen.
Select
Pressing displays the gate markers or trigger markers.
Select Mrks Tgdel
Markers
When is selected, Markers and indicate the start and end
Mrks
1 2
points of the selected measurement gate. Pressing toggles between the
Marker
two markers, the highlighted marker is the currently active marker. Use the
and keys to move the markers left or right across the display.
The tables on the lower left of the screen show the time ( ) and the
Time:
instantaneous power level ( ) of the markers at their configured points. The
Pow:
table highlighted with the green border represents the active marker, also
highlighted in green. A negative time value indicates a measurement before the
trigger point. (See Figure 4-7).
Gate timing parameters are all related to your chosen trigger point. This may be
NOTE
different from the timing of the triggering event if you have configured a trigger
delay.
Trigger delay value
Figure 4-8 Trace display with trigger delay menu
Keysight N1911A/1912A User's Guide 177