Procedure
1 Press
2 Select either
3 Press
Rising edge source
Figure 2-37
To help you quickly check the triggering setup, the current settings for all the
trigger parameters are shown with their respective softkey labels.
Keysight N1911A/1912A User's Guide
Acqn
softkey to configure a trigger.
Sing Trig
–
is a single shot mode. After triggering, the measurement is
Sing Trig
halted, the
symbol is displayed. You can start another measurement by
pressing the
–
is a continuos trigger mode. The symbol
Cont Trig
Settings
to configure the remaining trigger parameters. The trigger
Settings menu have two pages.
shows page two.
Trigger Setting Menu 1 of 2
General Power Meter Functions
or
.
Cont Trig
key.
Figure 2-37
or
is displayed.
shows page one and
Channel A is
trigger source
2
Figure 2-40
97