2
General Power Meter Functions
Setting display offsets
This gain or loss is applied to the measured power after any channel offsets or
mathematical functions have been included.
Offsets are entered in dB and the range of values is –100 dB to +100 dB. A
positive value compensates for a loss, and a negative value compensates for a
gain.
Procedure
Enter a display offset on the currently selected window:
1 Press
2 Select the window you wish to set the offset value on by pressing the
3 Use the
4 Press
Offset setting field
Offset value field
Figure 2-12
70
to display the Measurement Setup screen.
key. The currently selected window/measurement is displayed.
Meas Select
and
keys to highlight the Offset setting field.
to check the Offset setting field.
Typical display offset display
Keysight N1911A/1912A User's Guide
Selected
Window/
Measurement