3
Using P-Series Power Sensor
Improving the accuracy with additional settings
You can now return to the setup menus and adjust the default setting to obtain
greater measurement accuracy.
Channel Setup
Press
the channel you want to configure.
Figure 3-8
For E-Series E9320 power sensors range settings, only UPPER and LOWER
NOTE
ranges are available in Normal and Triggered mode.
Use the
to configure the setting. For further detail on these settings, refer to the
appropriate sections.
Meas Avg
Video Avg
Step Detec
Video B/W
162
. The Channel Setup screen is displayed. If using an N1912A, select
P-Series power sensor default channel setup
,
,
, and
keys to highlight the setting field and press
"Setting Measurement Averaging"
:
"Setting the Video Averaging"
:
"Step Detection"
t:
"Setting the Video Bandwidth"
:
on page 78
on page 82
on page 81
on page 84
Keysight N1911A/1912A User's Guide