Setting Up The Channel Trace; Procedure; Figure 2-29 The Placement Of Gates (Markers) In Auto Gating Mode 91 Figure 2-30 Trace Setup Display - Keysight N1911A User Manual

2 General Power Meter Functions

Setting up the Channel Trace

This feature is only available when a P-Series or an E-Series E9320 power sensor
NOTE
is connected.
The Trace Setup is the only location where you can change the Y-axis units from
NOTE
dBm to Watts.

Procedure

This procedure uses the Trace Setup under the Channel Setup menu.
NOTE
Alternatively, you can use a more visual method, when in the Graphical Trace
Mode (Trace Control Menu), to set the channel's Trace Control. (See
Trace Display"
1 Press
Figure 2-30
92
on page 152).
, to display the Trace Setup menu.
Trace Setup
Trace setup display
Keysight N1911A/1912A User's Guide
"Setting the