Figure 3-6 Trace Display With Trace Control Menu - Keysight N1911A User Manual

You can also setup the trigger delay in the Trigger menu, by pressing
NOTE
Delay
Trace Control
Press
are described in greater details in
Trace settings
Pulse wid th
Pulse period
Figure 3-6
The fields on the lower left of the screen are the X and Y trace setup fields. Using
the
Figure
The table on the lower right of the screen shows the eight automatic time
measurements performed on the first complete captured pulse after the trigger.
The eight measurements are rise time, fall time, time to positive occurrence, time
to negative occurrence, pulse width, pulse period (pulse repetitive interval), pulse
repetitive frequency and duty cycle.
The current settings of the X and Y scale are displayed on the reporting line above
both tables.
Keysight N1911A/1912A User's Guide
and entering a value in the pop-up window.
to display the Trace Control menu. Setting the trace features
Trace Control
Trace display with trace control menu
or keys you can highlight the item and change its value. (See
3-6)
Using P-Series Power Sensor
"Setting up the Channel Trace"
Gate 2 active
Rising edge
Falling edge
Duty cycle
Pulse repetitive frequency
3
,
Settings
on page 92.
159