3
Using P-Series Power Sensor
If you want to view the trace in linear mode, the Trace Setup is the only location
NOTE
where you can change the Y-scale units from
default unit is in logarithmic.
Gate Control Press
Gate Control
described in greater details in
page 156".
Viewing the results in a full screen window
Use the
provides a better resolution on the display. You can press
Gate Meas
current settings of the X and Y scale are displayed on the reporting line above the
results. You need to toggle the
160
to display the Gate Ctrl menu. Setting the gate features are
"Gate Control in a Single Enlarged Window"
key to display the trace in a full screen window display. This
to display the results as set in Single Enlarged Window mode. The
to
dBm
Watts
Trace Meas
key to allow the softkeys to be displayed.
Keysight N1911A/1912A User's Guide
; otherwise the
on
or