3
Using P-Series Power Sensor
Figure 3-5
TgDel
When
remove the gate markers and displays the trigger marker(s). The
when the trigger event occurs, whilst
the two points coincide, only the
The configured value is displayed below the
shown in
To indicate an off-screen trigger event,
trigger point,
Your chosen trigger point is used as the reference point for the timing of all the
NOTE
measurement gates.
Trig Delay
The trigger delay value is shown below the
trigger delay by pressing
window.
Pressing
158
Trace display with trigger delay menu
is selected you can adjust the trigger delay. The display changes to
TgDel
Figure
3-5.
is displayed.
Trig Delay
highlights
Select
shows the delayed trigger point. When
trigger is shown.
Trig Delay
is displayed. To indicate an off-screen
Trig Delay
and entering a numeric value in the pop-up
to display the trace markers again.
Mrks
Keysight N1911A/1912A User's Guide
Trigger Delay Value
indicates
softkey. This value is
softkey. You configure the