Figure 4-12 Channel Offset Display - Keysight N1911A User Manual

4 Using E9320 E-Series Power Sensors
Setting Offsets
Press
Figure 4-12
Use the
change. Press
setting these, refer to the appropriate section.
Offset
FDO Table
Trigger Setup
Press
The trigger status is displayed below the
Press the
parameters, for example, hold-off and hysteresis, to help you achieve a stable and
reliable trigger. Hence, this ensures that the gates you have set up are capturing
the required signal information. See
information.
182
. The Offsets Setup screen is displayed.
Offsets
Channel offset display
, , , and
to configure the required settings. For further detail on
"Setting channel offsets"
:
"Setting frequency dependent offsets"
:
. The Trigger menu is displayed.
softkey and add more accuracy to the remaining trigger
Settings
keys to highlight any parameters you want to
on page 68
label in the Trigger menu.
Acqn
"Setting the Trigger"
Keysight N1911A/1912A User's Guide
on page 71
on page 96 for further