Selecting Units Of Measurement From The Softkeys - Keysight N1911A User Manual

Selecting units of measurement from the softkeys

In some menus, for example, units in the Trace Setup menu, you are required to
enter the units of measurement for power. In some cases, due to the availability of
wide power range, the following menu is displayed:
Pressing
multiplier shown in front of
selected confirms the entry.
Invalid softkeys are grayed out so the value cannot be entered.
NOTE
Keysight N1911A/1912A User's Guide
mW
μW
nW
2 of 2
Increment Multiplier
General Power Meter Functions
W
Increment
multiplier
Decrement
multiplier
Cancel
or
Decrement Multiplier
.Pressing after the correct multiplier has been
W W
increases or decreases the
2
59