Front Panel Keys And Connections - Keysight N1911A User Manual

Front Panel Keys and Connections

This section briefly describes the functions of the front panel keys and connectors.
These keys are located to the left of the display.
Key
Keysight N1911A/1912A User's Guide
Function
Press this key to preset the power meter. An option list of pre-installed
measurement configurations is presented. Select an option and press the confirm
key.
Press this key to control the power meter from the front panel when it is operating
via the remote interfaces (when Local Lock Out is not enabled).
Press this key to select the upper or lower measurement window. The selected
window is highlighted by a blue line on the right side of the window. Any
measurement setup you create is performed in the selected window.
Press this key to choose windowed, expanded, or full-screen display of a numeric
measurement. It also provides quick access to the Gate Control screen and menu
when a trace window is selected.
Press this key to switch the meter between on and standby. When power is
supplied, the background LED is red. Pressing the key, switches the power meter on
and the background LED is green.
Introduction 1
33