Figure 1-14 Password Security Dialog Box - Keysight N1911A User Manual

To edit parameters shown, click Mod ify Configuration. The Enter Password
dialog box appears as shown in
Figure 1-14
Click the Submit (accept the default password) and the window opens as shown
in
For P-Series power meters with latest firmware upgrade to be LXI-C compliant,
NOTE
a LAN reset needs to be performed to ensure that the password is reset to
default. See LAN reset procedure as below.
Proced ure:
1 Press
2 Press
3 Press
When
NOTE
default.
You can change the password from the Configuring your N1912A Power Meter
NOTE
window as shown in
locate the Change Password parameter.
Keysight N1911A/1912A User's Guide
Password security dialog box.
Figure 1-15. The default password is "keysight".
,
Remote Interfaces
softkey to display the second page of the Remote I/F menu.
1 of 2
softkey to reset the LAN settings to default.
LAN Reset
softkey is pressed, it will also change the GPIB address to
LAN Reset
Figure
Figure 1-14.
to display the Remote Interfaces screen.
1-15. Scroll down the Parameter column until you
Introduction 1
55