Setting Limits - Keysight N1911A User Manual

Setting limits

The power meter can be configured to verify the current measurement in any
measurement line against predefined upper and/or lower limit values. The range
of values that can be set for the upper and lower limits and the default values
depends on the measurement units in the currently selected measurement line
(see
Table 2-6
Window Units
dB
dBm
%
W
Procedure
Set the limits as follows:
Ensure you have selected the channel you wish to set up.
NOTE
1 Press
2 Use the
3 Press
4 Use the
5 Press
Keysight N1911A/1912A User's Guide
Table 2-6).
Range of values for window limits
Maximum
+200 dB
+230 dBm
999.9 X%
100.000 XW
,
Meas Select
and keys to highlight the Limits: setting field.
to check the Limits: setting field.
key to highlight the Minimum Limits: value field.
to display the Minimum Limit pop-up.
General Power Meter Functions
Minimum Defaul t Maximum Defaul t Minimum
–180 dB 60 dB
–150 dBm 90 dBm
100.0 a% 100.0 M%
1.000 aW 1.000 MW
to display the Measurement Setup menus.
2
–120 dB
–90 dBm
100.0 p%
1.000 pW
119