Figure 1-2 Single Numeric And Analog Display - Keysight N1911A User Manual

1 Introduction
14
13
11
12
Figure 1-2
10
11 The upper window is configured to show a single numeric display.
12 The lower window is configured to show an analog meter which displays the
13 With a P-Series or an E-Series E9320 power sensor connected, the symbol
14 The channel measurement frequency.
15 This displays the connected sensor, the offset value, and the acquisition mode
40
Single numeric and analog display
Figure 1-2 shows the default display mode of two measurement windows. The
upper measurement window has a blue highlight on the right hand side of the
window showing it has been selected.
Using the , , or
measurement window.
Using the key on numeric measurement results window you can
choose either two rectangular windows, a single enlarged window, or a full
screen display by pressing. The display style is applied to the currently
selected window or measurement line.
measurement result and the meter scaling.
shows the trigger state
(Positive Slope).
on the channel. On dual channel models it shows for both channels.
keys you can change the selection of the
(Free Run), (Stopped),
Keysight N1911A/1912A User's Guide
15
10
(Negative Slope), or