Procedure; Figure 2-23 Gate Setup Screen - Keysight N1911A User Manual

2 General Power Meter Functions
Figure 2-22
NOTE
placement.

Procedure

This procedure uses the Gates Setup under the Channel Setup menu.
NOTE
Alternatively, you can use a more visual method, when in the Graphical Trace
Mode (Gate Control Menu), to set the channel's Gate Control. (See
Trace Display"
– Press
Figure 2-23
1 Highlight the Gate Start you want to configure using the
The gate start time is relative to the trigger event. Positive values set a
NOTE
measurement gate, to a maximum time of 1 second, after the trigger. Negative
time gate start values set a measurement gate, to a maximum time of 1 second,
before the trigger.
88
shows measurement results using this example of the gates
on page 152).
. The Channel Gate Setup screen is displayed.
Gates Setup
Gate Setup screen
keys.
,
Keysight N1911A/1912A User's Guide
"Setting the
, and