Table of Contents
Advertisement
[Setup] Menu ([User Maintenance] Options)
NOTE
Table description
Bold values in the table indicate the default settings.
The setting items or setting values with "*" may not be displayed depending on the availability of the optional
accessories and other settings.
Setting Item
[Adj. Start Position]
[Recovery Printing]
[Check Paper Size]
Downloaded from ManualsPrinter.com Manuals
Downloaded from
www.Manualslib.com
Setting Value
[Offset Y
(MP
Tray)]: -
5.0 to 0.0
to +5.0
(mm)
[Offset X
(MP
Tray)]: -
5.0 to 0.0
to +5.0
(mm)
[Offset Y
(Drawer
1)]: -5.0 to
Specifies the printing position of the paper in the specified paper source.
0.0 to
Adjusts the position in the vertical direction (Y) or the horizontal direction
+5.0 (mm)
(X) by the specified value.
[Offset X
The setting values are indicated in millimeters (mm), and you can adjust the
(Drawer
position using [
1)]: -5.0 to
0.0 to
If you do not adjust the printing position, specify [0.0] for this item.
+5.0 (mm)
Adjust the printing position for 2-sided printing as follows.
[Offset Y
(Drawer
*
2)]
: -5.0
to 0.0 to
+5.0 (mm)
[Offset X
(Drawer
*
2)]
: -5.0
to 0.0 to
+5.0 (mm)
[Offset Y
(2-Sided)]:
-5.0 to
0.0 to
+5.0 (mm)
[Offset X
(2-Sided)]:
-5.0 to
0.0 to
+5.0 (mm)
Specifies whether to print the partially printed page when the printer stops
[Off], [On]
printing due to a paper jam or an error occurring.
Specifies whether the printer should stop printing, displaying the message
[Off], [On]
<Check paper size.> or continue printing when [MP Tray Paper Size],
manuals search engine
] and [
].
Adjust the printing position of the first page using [Offset Y (2-Sided)]
and [Offset X (2-Sided)].
The printing position of the second page depends on the settings for
each paper source.
"Adjusting the Printing Position for Each Paper Source"
Setting
04L9-0AJ
Advertisement
Table of Contents
