The items registered and set by each of these switches comprise 8-bit switches. The figure below shows which numbers are assigned to which bits. Each bit has a
value of either 0 or 1.
Do not change service data identified as "not used"; they are set as initial settings.
14.3.2 SSSW-SW01
14.3.2.1 List of Functions
iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
Bit
0
1
2
3
4
5
6
7
14.3.2.2 Detailed Discussions of Bit 0
iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
Selects whether or not service error codes are output.
When output is selected, service error codes is report.
14.3.3 SSSW-SW03
14.3.3.1 List of Functions
iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
Bit
0
1
14-8
Function
Use it to indicate the version of the ROM (SYSTEM) on the image processor PCB.
Use it to indicate the version of the ROM (BOOT) on the image processor PCB.
Use it to indicate the version of option ROM.
Use it to indicate the version of the ROM on the DC controller PCB.
Function
Data check in D-RAM
CS automatic correction and document scan position adjustment