Dot1X Initialize - Cisco catalyst 3750 Command Reference Manual

dot1x initialize

dot1x initialize
Use the dot1x initialize privileged EXEC command to manually return the specified
IEEE 802.1x-enabled port to an unauthorized state before initiating a new authentication session on the
port.
Syntax Description interface interface-id
Defaults
There is no default setting.
Command Modes
Privileged EXEC
Command History Release
12.1(14)EA1
Usage Guidelines
Use this command to initialize the IEEE 802.1x state machines and to set up a fresh environment for
authentication. After you enter this command, the port status becomes unauthorized.
There is not a no form of this command.
Examples
This example shows how to manually initialize a port:
Switch# dot1x initialize interface gigabitethernet2/0/22
You can verify the unauthorized port status by entering the show dot1x [interface interface-id]
privileged EXEC command.
Related Commands Command
show dot1x
Catalyst 3750 Switch Command Reference
2-148
dot1x initialize [interface interface-id]
(Optional) Port to be initialized.
Modification
This command was introduced.
[interface interface-id]
Chapter 2 Catalyst 3750 Switch Cisco IOS Commands
Description
Displays IEEE 802.1x status for the specified port.
OL-8552-07