Guidelines and Limitations
This chapter includes the following sections:
•
•
•
Verified Limits for FCoE for the Cisco Nexus 7000 Series and
Cisco MDS 9500
The configuration limits are documented in the Cisco Nexus 7000 Series NX-OS Verified Scalability Guide.
Cisco Nexus 7000: Guidelines and Limitations
• You cannot enable FCoE on default VLAN.
• The QoS policy must be the same on all Cisco FCoE switches in the network.
• Beginning with Cisco NX-OS Release 6.1, FCoE is supported on F2 and F2e Series modules.
FCoE VDC
FCoE in a dedicated storage VDC has the following guidelines:
• Enable the FCoE feature set in only one VDC.
• Create VLANs in the FCoE allocated VLAN range.
• Do not enable any other features other than storage-related features in the dedicated FCoE VDC.
OL-25809-02
Verified Limits for FCoE for the Cisco Nexus 7000 Series and Cisco MDS 9500 , page 51
Cisco Nexus 7000: Guidelines and Limitations, page 51
Cisco MDS 9500: Guidelines and Limitations, page 53
◦ FCoE supports only F2e (SFP+) modules.
◦ FCoE does not support F2e (Copper) modules.
A P P E N D I X
Cisco NX-OS FCoE Configuration Guide for Nexus 7000 and MDS 9500
B
51