Own Station Is Set As Reserved Station - Mitsubishi Electric MELSEC Q Series Reference Manual

10.4.6

Own station is set as reserved station

The following explains the procedures to be taken when a station set as a reserved station exists in the actual network.
Station No.4 is assumed to be set as a reserved station.
(1) When a programming tool connected station is normally operating
Control
station Selected Normal station
No.1 station No.2
Normal station Normal station
No.4 No.3
Control station Normal station
No.1 No.2
Normal Normal station
Selected
station No.3
station
No.4
Select the own station.
An error has occurred in the station No.4.
Select the station No.4.
Click the error details button.
The Error Factor field indicates that the station No.4 has been set as a
reserved station.
Take corrective actions according to the troubleshooting.
CHAPTER 10 TROUBLESHOOTING
551
10