Setting The Date; Setting The Time - StorageTek L700 Service Manual

Setting the Date

Set the date and time from the Lib Config Menu:
1. At the Lib Config Menu screen, press the arrow button until the cursor underscores
DATE.
2. Press the
An editing screen appears.
3. On the editing screen:
a. Press the up and down arrow buttons to select a value for each portion (field) of
b. Press the
c. Press the
4. When the screen displays your desired setting, press the
right-most field to save the changes. You may press the
most field to abort.
5. If you have already changed the library's SCSI ID or Port 0 address and are planning
to exit the Main Configuration Menu at this time, you must press the
If you wish to set other configuration values, continue with the next section.
If you have not changed the library's SCSI ID or Port 0 address and are not setting
other configuration values, press the

Setting the Time

Set the time from the Lib Config Menu. FSC log entries correspond to this time setting:
1. At the Lib Config Menu screen, press the arrow button until the cursor underscores
TIME.
2. Press the
An editing screen appears.
3. On the editing screen:
a. Press the up and down arrows to select a value for each portion (field) of the
b. Press the
c. Press the
4. When the screen displays your desired setting, press the
right-most field to save the changes. (You may press the
most field to abort.)
95846
button.
SELECT
the date.
button to move right to the next field.
SELECT
button to move left to the previous field.
MENU
button.
SELECT
time.
button to move right to the next field.
SELECT
button to move left to the previous field.
MENU
Fourteenth Edition
StorageTek Proprietary
SELECT
MENU
button until you exit all menus.
MENU
SELECT
MENU
Operator Panel Entry
button from the
button from the left-
button.
RESET
button from the
button from the left-
2-27