Gps.nav.powersave=<On>,<Ontime>,<Lptime> - Enables/Disables The Low Power Mode - FALCOM MAMBOII User Manual

C C
ONFIGURATION OMMAND
3.2.4.1.8
Command syntax
Examples
Responses
Command description
This command enables or disables individually the low-power mode of the
integrated high sensitive GPS receiver. By default, it is disabled (off).
Parameter description
<on>
String type. Enables or disables low-power mode. It can be set to:
Value
on
off
<onTime>
Integer type in the range
milliseconds, the GPS receiver will stay in full power state until a GPS position
solution (fix) is made and estimated to be reliable.
<lpTime>
Integer type in the range
in milliseconds, the embedded GPS receiver will stay in full and low power states.
Note:
For optimum performance, it is recommended to use either 300 ms onTime
•
and 1000 ms lpTime or 400 ms onTime and 2000 ms lpTime.
This confidential document is a property of FALCOM and may not be copied or circulated without previous permission.
S - F R
ET IRMWARE
GPS.Nav.PowerSave=<on>,<onTime>,<lpTime> – Enables/Disables the
low power mode
$PFAL,GPS.Nav.Powersave=<on>,<onTime><lpTime>
$PFAL,GPS.Nav.Powersave=on,400,2000
$PFAL,GPS.Nav.Powersave=off
E.g. $SUCCESS
Meaning
Enables low-power mode.
Disables low-power mode.
1000
2.4.0_ -
EVISION BETA
to 900. It defines the OnTime period, in
200
... 10000. It defines the complete interval of time,
V 1.0.0
ERSION
Page 88 of 271