Cnf.show - Shows All Used Parameters - FALCOM MAMBOII User Manual

C C
ONFIGURATION OMMAND
3.2.2.6
Command syntax
Examples
Responses
Command description
This command outputs all new defined parameter names.
Parameter description
None.
Notes
Default settings are displayed, when no new settings are specified for that
•
parameter. For example, if the user changes the device name from default
"unnamed MAMBOII" to a new name "myMAMBOII", and then performs a
request with the "$PFAL,Cnf.Show" the MAMBOII outputs the new defined
parameter settings "myMAMBOII" .
If the user has cleared a parameter value, the default value will be shown.
•
This confidential document is a property of FALCOM and may not be copied or circulated without previous permission.
S - F R
ET IRMWARE

Cnf.Show - Shows all used parameters

$PFAL,Cnf.Show
$PFAL,Cnf.Show
E.g.
$DEVICE.SERIAL.BAUDRATE=115200
$DEVICE.GPS.BAUDRATE=38400
$DEVICE.COMM.SERIAL=cmd,F
$DEVICE.CMD.PFAL.EN=F
$DEVICE.PFAL.SEND.FORMAT="$",CKSUM,"","$<end>"
$DEVICE.BAT.MODE=always,3.55
$DEVICE.IGNTIMEOUT=60000
$DEVICE.SLEEP.IGN=1
$DEVICE.GPS.STARTUP=on
$DEVICE.GPS.AUTOCORRECT=off,5.0,127,50,10
$DEVICE.GPS.TIMEOUT=1,30
$DEVICE.GPS.CFG=3
$DEVICE.GPS.STARTUP=on
$DEVICE.GPS.TIMEOUT=1,30
$DEVICE.GSM.STARTUP=on
$DEVICE.IEEE.STARTUP=off
$DEVICE.IGNTIMEOUT=60000
$DEVICE.SLEEP.IGN=1
$DEVICE.PFAL.SEND.FORMAT="$",CKSUM,"","$<end>"
$DISP.MENU1.0=Phonebook
$DISP.MENU1.1=Office:GSM.VoiceCall.Dial,"+49200000000"
$DISP.MENU1.2=Home:GSM.VoiceCall.Dial,"+493600000000"
$DISP.MENU2.0=Messages
$DISP.MENU2.1.0=Incoming SMS
$DISP.MENU2.1.1=Last SMS:DISPLAY.Show=VIEW_SMS
$DISP.MENU2.2.0=Outgoing SMS
$DISP.MENU2.2.1=Last SMS:DISPLAY.Show=VIEW_SMS
end so on ...
2.4.0_ -
EVISION BETA
V 1.0.0
ERSION
Page 80 of 271