Io Parameter; Io.beep.enable - FALCOM MAMBOII User Manual

C C
ONFIGURATION OMMAND

3.2.15 IO parameter

3.2.15.1 IO.BEEP.ENABLE

Parameter syntax
This parameter controls the operation of the beeper. It switches on and off the
beeper.
<control>
Determines whether to switch on or off the beeper during start-up. It can be set
to:
Value
on
off
How to set/get device configuration:
$PFAL,Cnf.Set,IO.BEEP.ENABLE=on
Set configuration
$PFAL,Cnf.Get,IO.BEEP.ENABLE
Get configuration
This confidential document is a property of FALCOM and may not be copied or circulated without previous permission.
S - F R
ET IRMWARE
IO.BEEP.ENABLE=<control>
Meaning
Switched on during start-up.
Switched off during start-up.
2.4.0_ -
EVISION BETA
V 1.0.0
ERSION
Page 170 of 271