Userevent" Command Index; Sys.userevent<Index> - Creates A User-Event For Specific Application Requirements - FALCOM MAMBOII User Manual

C C
ONFIGURATION OMMAND

3.2.1.10 "UserEvent" command index

3.2.1.10.1 Sys.UserEvent<index> – Creates a user-event for specific application
Command syntax
Examples
Responses
Command description
This command is intended to create a user-event (see chapter
can be used to execute one or more alarms. Once this command is executed the
corresponding event index (e.g SYS.UserEvent.e0) rises.
Parameter description
<index>
Determines the index of the UserEvent to be created. Up to 10 UserEvents are
available. It can be set to a value from
Notes
This event can be used to directly combine/link several alarms. (i.e. for
•
optimizing larger configurations or simply if more than 5 conditions are
needed).
WARNING
•
The UserEvent is not recommended for use, as it may produce „endless loops"
that can slow down the system performances or may affect the stability of
other functions.
•
Use the UserEvents at own risk. However, when using the UserEvents, think
about all consequences of (maybe recursively) launching alarms, especially
in combination with various states, which may influence itself by actions.
System behaviour can be very unpredictable and complex.
• Therefore no support will be provided for configurations that contain
UserEvents.
This confidential document is a property of FALCOM and may not be copied or circulated without previous permission.
S - F R
ET IRMWARE
requirements
Sys.UserEvent<index>
$PFAL,Sys.UserEvent0
E.g.
$launch user event 0
2.4.0_ -
EVISION BETA
to 9.
0
V 1.0.0
ERSION
which
3.2.25.1.1.2.12)
Page 59 of 271