Voice Call" Command Index; Gsm.voicecall.dial,<"P_Number"> - Makes A Gsm Voice Call; Gsm.voicecall.accept - Accepts An Incoming Voice Call; Gsm.voicecall.hangup - Hangs Up An Active Voice Call - FALCOM MAMBOII User Manual

C C
ONFIGURATION OMMAND
3.2.5.2
3.2.5.2.1
Command syntax
Examples
Responses
Command description
This command sets up an outgoing voice call.
Parameter Description
<"p_number">
Wrapped in quotation marks (" "), it specifies the phone number for dialling. It
originates an outgoing voice call to the specified target phone number
<"p_number">. The phone number is in international format including the area
code, country code and phone number.
3.2.5.2.2
Command syntax
Examples
Responses
Command description
This command accepts an incoming voice call, which is usually detected from an
incoming ring event.
Parameter Description
None
3.2.5.2.3
Command syntax
Examples
Responses
Command description
This command terminates an established call.
Parameter Description
None
This confidential document is a property of FALCOM and may not be copied or circulated without previous permission.
S - F R
ET IRMWARE

"Voice Call" command index

GSM.VoiceCall.Dial,<"p_number"> - Makes a GSM voice call
$PFAL,GSM.VoiceCall.Dial,<"p_number">
$PFAL,GSM.VoiceCall.Dial,"+4912345678"
E.g.
$number dialed

GSM.VoiceCall.Accept - Accepts an incoming voice call

$PFAL,GSM.VoiceCall.Accept
$PFAL,GSM.VoiceCall.Accept
E.g.
$call accepted
GSM.VoiceCall.Hangup – Hangs up an active voice call
$PFAL,GSM.VoiceCall.Hangup
$PFAL,GSM.VoiceCall.Hangup
E.g.
$call finished
2.4.0_ -
EVISION BETA
V 1.0.0
ERSION
Page 103 of 271