Bt" Command Type; Audio" Command Index; Bt.audio.bound - Pairs Bluetooth Audio Devices; Bt.audio.connect - Places Both Bluetooth Devices In The Connection Mode - FALCOM MAMBOII User Manual

C C
ONFIGURATION OMMAND

3.2.9 "BT" command type

Your MAMBOII integrates the Bluetooth technology that allows you to use other
Bluetooth wireless devices, such as headset, and makes your calls or transfer data
between your MAMBOII and other devices (such as PC, PDA, etc.) over a radio link
instead of a cable. If you are transferring data from MAMBOII to PC or PDA and vice
versa, you will also be able to place a GSM call. Before you create a connection
between MAMBOII and your Headset, you must have the following information:
• Address of the Bluetooth Headset device to connect to, which must be entered
into the
DEVICE.BT.AUDIOGW
All commands described below imply that your Bluetooth headset is switched on.
3.2.9.1
3.2.9.1.1
Command syntax
Examples
Responses
Command description
This command allows you to search and launch the pairing process with a Bluetooth
headset device and finally to open an audio connection to the paired headset
when you are connecting it for the first time. So it is not required to transmit the
command BT.Audio.Connect to the MAMBOII device. Pairing process will be done
automatically based on the address and PIN code of the remote headset given
(stored) in the DEVICE.BT.AUDIOGW parameter. You need to set the target
Bluetooth headset into the pairing mode before executing this command. How to do
it, refer to the headset Users's Manual.
Parameter description
none
3.2.9.1.2
Command syntax
Examples
Responses
Command description
Use this command to open an audio connection to the paired headset (Please, do
not use this command when you connecting a headset for the first time).
Parameter description
none
This confidential document is a property of FALCOM and may not be copied or circulated without previous permission.
S - F R
ET IRMWARE
parameter.

"Audio" command index

BT.Audio.Bound - Pairs Bluetooth audio devices

$PFAL,BT.Audio.Bound
$PFAL,BT.Audio.Bound
-
BT.Audio.Connect - Places both Bluetooth devices in the connection
mode
$PFAL,BT.Audio.Connect
$PFAL,BT.Audio.Connect
-
2.4.0_ -
EVISION BETA
V 1.0.0
ERSION
Page 141 of 271