FALCOM MAMBOII User Manual page 156

C C
ONFIGURATION OMMAND
How to set/get device configuration:
$PFAL,Cnf.Set,DEVICE.PFAL.SEND.FORMAT="$",CKSUM,"","<end>"
Set configuration
$PFAL,Cnf.Get,DEVICE.PFAL.SEND.FORMAT
Get configuration
Notes
•
Depending on the selected report syntax, all messages dispatched with
MSG.Send.... command, including <protocols> and <"text">, will change their
syntax as follow.
For example, you send or configure the MAMBOII to output its position to
the serial channel:
PFAL,MSG.Send.Serial,8,"MAMBOII outputs its GPS
Also you choose the following syntax:
PFAL,Cnf.Set,DEVICE.PFAL.SEND.FORMAT="$",CKSUM,"","<end>"
The message the system MAMBOUU sends out will look in this order:
$MAMBOII outputs its GPS
$GPRMC....*21<CRLF>
<end><CRLF>
If you choose the following syntax:
PFAL,Cnf.Set,DEVICE.PFAL.SEND.FORMAT="$",CKSUM,"&","<end>"
The messages the system MAMBOII sends out will look in this order:
$MAMBOII outputs its GPS
$GPRMC....*21&<CRLF>
<end><CRLF>
This confidential document is a property of FALCOM and may not be copied or circulated without previous permission.
S - F R
ET IRMWARE
2.4.0_ -
EVISION BETA
positions<CRLF>
positions&<CRLF>
V 1.0.0
ERSION
positions"
Page 156 of 271