Tcp" Command Type; Tcp" Command Index; Tcp.client.connect - Performs A Tcp Connection To The Server - FALCOM MAMBOII User Manual

C C
ONFIGURATION OMMAND

3.2.6 "TCP" command type

In order to have a basic understanding how does the communication between the
MAMBOII device and the remote server work, please refer to chapter 2.2, page
3.2.6.1
3.2.6.1.1
Command syntax
Examples
Responses
Command description
If you are using a connection-oriented protocol such as TCP, this command
connects the MAMBOII to a remote TCP server using the specified IP address and
port number. To open such a connection, first set the server address, and the port
with
TCP.CLIENT.CONNECT=<s_type>,<ip_address>,<port>
command to connect to. After the TCP connection has been established
successfully, use the TCP.Client.Send,<protocols>,<"text"> command to send the
data. To know whether the MAMBOII results TCP connected or disconnected,
switch on the debugging mode and use a terminal program where you will see the
TCP related events, or you can configure a LED indicator to indicate TCP status –
see examples in chapter
Parameter description
none.
Notes
• If a TCP connection will be initiated and the MAMBOII is not able to connect
to, it is started with the default value due to missing values for the
TCP.CLIENT.CONNECT
•
Before using this message, make sure that the MAMBOII is already GPRS
attached, otherwise the MAMBOII is not able to initiate a TCP connection
even if the TCP settings are correctly set.
This confidential document is a property of FALCOM and may not be copied or circulated without previous permission.
S - F R
ET IRMWARE

"TCP" command index

TCP.Client.Connect - Performs a TCP connection to the server

$PFAL,TCP.Client.Connect
$PFAL,TCP.Client.Connect
-
.
parameters according to the used remote server.
2.4.0_ -
EVISION BETA
, and then execute this
V 1.0.0
ERSION
16.
Page 111 of 271