Cpu" Command Index; Sys.cpu.reset - Resets The Arm7 Controller And Sets The Device Into The Upgrade Mode - FALCOM MAMBOII User Manual

C C
ONFIGURATION OMMAND

3.2.1.13 "CPU" command index

3.2.1.13.1 Sys.CPU.Reset – Resets the ARM7 controller and sets the device into
Command syntax
Examples
Responses
Command description
This command resets the ARM7 controller and sets MAMBOII into RedBoot console.
If the system MAMBOII is set into the upgrade mode, the new firmware can be
transferred over Bluetooth interface. To to enter RedBoot you have to press
"Crtl+C" within 3 seconds after this command is executed. If RedBoot console is left
and the system starts up, you have to perform a Bluetooth connection, because
during reset Bluetooth module is turned off and during startup will be turned on
again.
Parameter description
None.
This confidential document is a property of FALCOM and may not be copied or circulated without previous permission.
S - F R
ET IRMWARE
the upgrade mode.
$PFAL,Sys.CPU.Reset
$PFAL,Sys.CPU.Reset
-
2.4.0_ -
EVISION BETA
V 1.0.0
ERSION
Page 63 of 271