Msg.info.time - Gets The Current System Time - FALCOM MAMBOII User Manual

C C
ONFIGURATION OMMAND
"text&(<entry
Each dynamic entry is separated by ampersand "&" without spaces and it is
enclosed in parentheses "( )".
The command for requesting such system states might look like this:
For example:
$PFAL,MSG.Info.Protocol,0,"on
Dynamic entries are listed in chapter
Notes
•
In order to receive more than one protocol at once, you have to specify the
<protocols> in the hexadecimal value and add the corresponding hex value
of required protocols, for example:
The
−
"$PFAL,MSG.Info.Protocol,27,"test""
GGA+GSA+GSV+VTG protocols will be received at once,
−The
"$PFAL,MSG.Info.Protocol,4E,"test""
GGA+GSA+GSV+RMC+IOP protocols will be received at once.
•
The defined user protocols (in hexadecimal value) will be transmitted only
one time after request and not periodically.
•
Set <protocols> to 0 to transmit only the text or and dynamic entries.
3.2.7.4.3
Command syntax
Examples
Responses
Command description
This command returns the current system date, time, date, week number and
weekday. The system time is expressed in Coordinated Universal Time (UTC).
Parameter Description
None
Notes
•
In order to retrieve a valid date, time week number and weekday, the device
must have a valid GPS fix.
This confidential document is a property of FALCOM and may not be copied or circulated without previous permission.
S - F R
ET IRMWARE
>)text&(<entry
1 2
hex value
hex value
MSG.Info.Time – Gets the current system time
$PFAL,MSG.Info.Time
$PFAL,MSG.Info.Time
E.g. $current time:12:07:24
$current date:11.09.2007 week:37 weekday:2 (tuesday)
2.4.0_ -
EVISION BETA
>)text...&(<entry >)"
n
Time
&(Date) at &( ) it is moving at
6.2 page 243.
27 added
4E added
V
ERSION
&(Speed) m/s"
on the message
means
on the message
means
Page 133 of 271
1.0.0
the
the