C
C
ONFIGURATION
OMMAND
3.2.1.6.6
Command syntax
Sys.Counter<index>.Load<storage_index>
$PFAL,Sys.Counter0.Load0
Examples
E.g.
Responses
Command description
To load a saved Counter<index>, use this command.
Parameter description
<index>
Determines the index of the counter to be loaded. Up to 20 Counters are
available. It can be set to a value from
<storage_index>
Integer type storage index in the range
portion of FLASH memory in which determined data written on it will be not lost
when the device performs a reset, goes into sleep mode or is turned off. The
<storage_index> is reserved to save the status of a Timer, Counter, Trigger etc.
Each storage index can be updated with new data. Each data set into a
storage index overwrites the existed contents. Read also the description of
storage index given in the table of abbreviations.
Notes
•
Alias
ALIAS.STORAGE<storage_index>=<alias_name>. Read also the description of
storage index given in the table of abbreviations.
3.2.1.6.7
Command syntax
Sys.Counter<index>.Clear
$PFAL,Sys.Counter0.Clear
Examples
E.g.
Responses
Command description
To set a specified Counter<index> to zero, use this command. This might cause the
generation of a counter event (Sys.Counter.e0
reached zero (0) before.
Parameter description
<index>
Determines the index of the counter to be cleared. Up to 20 Counters are
available. It can be set to a value from
This confidential document is a property of FALCOM and may not be copied or circulated without previous permission.
S
- F
R
ET
IRMWARE
Sys.Counter<index>.Load<storage_index>–
storage contents
$Counter 0 loaded
OR
$error loading Counter 0
names
can
be
Sys.Counter<index>.Clear – Sets Counters to 0
$Counter 0 set to 0
2.4.0_
-
EVISION
BETA
//if storage index is empty or results other
data
to 19.
0
to 4. Each storage index is a fixed
0
defined
for
all
storage
if the value of this counter has not
)
to 19.
0
V
ERSION
Loads
Counters
with
indices
by
using
Page 55 of 271
1.0.0
Need help?
Do you have a question about the MAMBOII and is the answer not in the manual?
Questions and answers