Gps.nav.position<Buffer_Index>=Load<Storage_Index> - Loads Gps Data From Storage To Buffer Index For Temporarily Use; Gps.nav.distance - Gets The Current Travelled Distance From A Start Point - FALCOM MAMBOII User Manual

C C
ONFIGURATION OMMAND
Notes
•
An Alias name can be defined for each storage index by using
ALIAS.STORAGE<storage_index>=<alias_name>. Read also the description of
storage index given in the table of abbreviations.
3.2.4.1.4
Command syntax
Examples
Responses
Command description
This command loads the contents of the selected <storage_index> into the selected
<buffer_index> for temporarily use. The selected buffer index will be updated with
new data while the contents of the <storage_index> remains unchanged. Do not
use other data stored from a Timer or a Trigger, just GPS position. Validate this
content before using it.
Parameter description
<buffer_index>
Integer type, specifies the memory buffer index in the range from
data in a buffer index is stored temporarily. The content of each buffer index is
available as long as the internal software is running. Should the device be reset,
switched off, or goes into sleep mode, each index loses its contents forever.
Each memory buffer index can be updated with new data or the available
data on them can be erased.
<storage_index>
Integer type, specifies the storage index in the range from
index is a portion of FLASH memory in which determined data written on them
will not be lost when the device performs a reset, goes into sleep mode or is
turned off. Each storage index has a fixed size space and each of them can be
updated with new data. Read also the description of storage index given in the
table of abbreviations.
Notes
• An Alias name can be defined for each storage index by using
ALIAS.STORAGE<storage_index>=<alias_name>. Read also the description of
storage index given in the table of abbreviations.
3.2.4.1.5
Command syntax $PFAL,GPS.Nav.Distance
Examples $PFAL,GPS.Nav.Distance
e.g. $current distance: 1000 m
Responses
Command description
This command returns the current covered distance, in meter, since the device has
left a known start point. When the MAMBOII device has got a valid GPS fix, the
MAMBOII stores internally a start point. The stored distance, which is based on a
point-to-point calculation, results automatically updated once the vehicle
(equipped with a MAMBOII) starts moving.
This confidential document is a property of FALCOM and may not be copied or circulated without previous permission.
S - F R
ET IRMWARE
GPS.Nav.Position<buffer_index>=load<storage_index> – Loads GPS
data from storage to buffer index for temporarily use
$PFAL,GPS.Nav.Position<buffer_index>=load<storage_index>
$PFAL,GPS.Nav.Position3=load0
E.g.
$Position 3 loaded
GPS.Nav.Distance – Gets the current travelled distance from a start
point
2.4.0_ -
EVISION BETA
V 1.0.0
ERSION
to 4. The
0
to 4. Each storage
0
Page 86 of 271