Gprs Parameters; Gprs.apn; Gprs.autostart - FALCOM MAMBOII User Manual

C C
ONFIGURATION OMMAND

3.2.21 GPRS parameters

All parameters below specify the settings to be used to establish a GPRS connection.

3.2.21.1 GPRS.APN

Parameter syntax
This parameter specifies the APN Access Point Name (text string). The APN is logical
name that is used to select the GGSN or the external packet data network. In other
words, the APN name that your network operator has provided to connect the
MAMBOII to the Internet. The APN specifies the external network that a MAMBOII
can access. It also defines the type of IP address to be utilized, security mechanisms
to invoke,
connections.
<value>
It specifies the Access Point Name (APN). The logical name that is used to select
the GGSN or the external packet data network. Consult your Network Operator
for the correct APN settings).
How to set/get GPRS configuration:
Set configuration
Get configuration
Notes
•
If the value is omitted, then it is set to the default value.

3.2.21.2 GPRS.AUTOSTART

Parameter syntax
It specifies the start-up mode of the GPRS connection.
<value>
It specifies the start-up mode of the GPRS connection. It can be set to:
Value
0
1
How to set/get GPRS configuration:
Set configuration
Get configuration
This confidential document is a property of FALCOM and may not be copied or circulated without previous permission.
S - F R
ET IRMWARE
GPRS.APN=<value>
available value added
$PFAL,Cnf.Set,GPRS.APN=internet.t-d1.de
$PFAL,Cnf.Get,GPRS.APN
GPRS.AUTOSTART=<value>
Meaning
Disables auto-reconnect.
Enables auto-reconnect. The device automatically and
repeatedly attempts to re-establish the connection. The
GSM.GPRS.eConnecting event raises each time the
device tries to re-establish the connection until it is
attached to the GPRS.
$PFAL,Cnf.Set,GPRS.AUTOSTART=1
$PFAL,Cnf.Get,GPRS.AUTOSTART
2.4.0_ -
EVISION BETA
services, redundancy,
V 1.0.0
ERSION
and fixed-end
Page 183 of 271