C
C
ONFIGURATION
OMMAND
3.2.7.4
3.2.7.4.1
Command syntax
Examples
Responses
Command description
This command retrieves the login data that the device will send to the remote
server (e.g FALCOM application server) to identify itself. The login TCP packet
consists of the DeviceName, Hardware, Firmware version, Revison, IMEI and Local
IP.
Parameter description
None.
3.2.7.4.2
Command syntax
Examples
Responses
Command description
This command transmits the specified text and GPS protocols back to the sender.
Depending on the used connection type the selected protocol(s) and user
specified text could be transmitted via serial interface, CSD, SMS or TCP to the
command sender. Please note that, the user specified text is firstly received
followed by the selected protocols.
Parameter Description
<protocols>
It specifies the kind of protocols to be transmitted back to the command sender.
Supported protocols are listed in chapter
<"text">
It specifies the text to be added to the selected protocols and transmitted back
to the command sender. The text is limited to
wrapped in quotation marks (" ") even if there is no text specified. The text is
automatically terminated by <CR><LF>.
If you want to output also any system state (dynamic entry) when the command
is executed, the syntax of the <"text"> can be changed to:
This confidential document is a property of FALCOM and may not be copied or circulated without previous permission.
S
- F
R
ET
IRMWARE
"Info" command index
MSG.Info.ServerLogin – Gets login information that the device sends to
the server
$PFAL,MSG.Info.ServerLogin
$PFAL,MSG.Info.ServerLogin
E.g.
$DeviceName=Mambo2_Fadil
$Software=MAMBOII_2.4.3_ALPHA_200807
$Hardware=MAMBOII-TELIT[GE864-QUAD]
$LastValidPosition=$GPRMC,114814.000,A,5040.3991,N,01058.8435,E,,,11
0907,,
$IMEI=357023006112211
$LocalIP=10.129.24.95
$CmdVersion=2
$SUCCESS
MSG.Info.Protocol,<protocols>,<"text"> - Transmits protocol reports to
the sender
$PFAL,MSG.Info.Protocol, <protocols>,<"text">
$PFAL,MSG.Info.Protocol,
$PFAL,MSG.Info.Protocol,8,"MAMBOII outputs its GSP positions"
E.g.
MAMBOII outputs its GSP positions
$GPRMC,120633.000,V,5040.3991,N,01058.8435,E,,,110907,,
$SUCCESS
2.4.0_
-
EVISION
BETA
&(entry)">
<protocols>,<"text
6.3
page
245.
200
V
ERSION
characters and it must be
Page 132 of 271
1.0.0
Need help?
Do you have a question about the MAMBOII and is the answer not in the manual?
Questions and answers