Gps" Command Index; Sys.gps.enable - Powers On The Gps Engine; Sys.gps.disable - Powers Down The Gps Engine; Sys.gps.reset - Resets The Gps Engine - FALCOM MAMBOII User Manual

C C
ONFIGURATION OMMAND
3.2.1.9
3.2.1.9.1
Command syntax
Examples
Responses
Command description
This command powers on the GPS engine if previously has been switched off. The
event SYS.GPS.eEnable occurs. By default the GPS engine is always powered on
when the system starts.
Parameter description
None.
3.2.1.9.2
Command syntax
Examples
Responses
Command description
This command powers off the GPS engine if it is currently running. The event
SYS.GPS.eDisable occurs.
Parameter description
None.
3.2.1.9.3
Command syntax
Examples
Responses
Command description
This command resets the GPS engine. The event SYS.GSM.eEnable occurs when
the GSM engine restarts. This command can be executed, for example, when the
GPS engine reports error during the runtime.
Parameter description
None.
This confidential document is a property of FALCOM and may not be copied or circulated without previous permission.
S - F R
ET IRMWARE

"GPS" command index

Sys.GPS.Enable – Powers on the GPS engine
Sys.GPS.Enable
$PFAL,Sys.GPS.Enable
E.g.
$SUCCESS
Sys.GPS.Disable – Powers down the GPS engine
Sys.GPS.Disable
$PFAL,Sys.GPS.Disable
E.g.
$SUCCESS
Sys.GPS.Reset – Resets the GPS engine
Sys.GPS.Reset
$PFAL,Sys.GPS.Reset
E.g.
$SUCCESS
2.4.0_ -
EVISION BETA
V 1.0.0
ERSION
Page 58 of 271