1. Manuals
  2. Brands
  3. FALCOM Manuals
  4. GPS
  5. MAMBOII
  6. User manual

FALCOM MAMBOII User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
T
://
.
.
/
HIS DOCUMENT IS AVAILABLE AT
HTTP
WWW
FALCOM
DE
MAMBOII
operating with firmware version 2.4.0
Configuration Command Set
User's guide
Supports both GSM and TCP applications
Version: 1.1.0; Last Updated: 13/09/2007;
This document will be regularly updated.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MAMBOII and is the answer not in the manual?

Questions and answers

Related Manuals for FALCOM MAMBOII

Summary of Contents for FALCOM MAMBOII

  • Page 1 HIS DOCUMENT IS AVAILABLE AT HTTP FALCOM MAMBOII operating with firmware version 2.4.0 Configuration Command Set User’s guide Supports both GSM and TCP applications Version: 1.1.0; Last Updated: 13/09/2007; This document will be regularly updated.

  • Page 2: Table Of Contents

    3.2.1.4.5 Sys.Timer<index>.Resume– Restarts the execution of paused timers ........47 3.2.1.4.6 Sys.Timer<index>.Arm– Arms initialized and disarmed timers ..........47 This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 2 of 271...
  • Page 3 3.2.3 “IO” command type .......................82 3.2.3.1 “Beep” command index ........................82 3.2.3.1.1 IO.Beep<index>=<config_type> – Generates beep tones ............82 This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 3 of 271...
  • Page 4 3.2.5.4.2 GSM.DataCall.Accept - Accepts an incoming Data call ............108 3.2.5.4.3 GSM.DataCall.Hangup – Hangs up an active voice call ............109 3.2.5.5 “GPRS” command index ....................... 109 This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 4 of 271...
  • Page 5 ..............................137 3.2.8.1.3 IEEE.Keyfob<kf_div_index>.Vibration=<config_type> – Generates vibration on a Keyfob device ..............................138 3.2.8.2 “IOBOX” command index ......................139 This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 5 of 271...
  • Page 6 3.2.16.1 MOTION.FILTER ........................171 3.2.17 ALIAS parameter ......................172 3.2.17.1 ALIAS.<type> ..........................172 3.2.18 DBG parameter ......................172 3.2.18.1 DBG.EN ............................. 172 This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 6 of 271...
  • Page 7 3.2.25.1.1.2.6 Sys.BT (BLUETOOTH states and events) ..................216 3.2.25.1.1.2.7 BT.Audio (BLUETOOTH Audio states and events) ................216 3.2.25.1.1.2.8 Sys.GPS (GPS states and events) ....................216 This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 7 of 271...
  • Page 8 6.5 NMEA messages transmitted/selected by/on MAMBOII device ........251 6.5.1 Description of NMEA output messages ..............251 6.5.1.1 $GPGGA message ........................252 This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 8 of 271...
  • Page 9 6.11.4.4 Storing information to non volatile memory .................269 6.12 ISP, GPRS configuration parameters of German service providers ...... 269 6.13 Used abbreviations ......................270 This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 9 of 271...
  • Page 10 - Added new command IO.Vibration=<config_type>. - Added new con figuration parameter DISP.TZ - Converts from time-zone name to local time. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 10 of 271...
  • Page 11 FALCOM WIRELESS COMMUNICATIONS GmbH. No patent liability is assumed with respect to the use of the information contained herein. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 11 of 271...

  • Page 12: Introduction

    MAMBOII device. More precisely, how to configure the MAMBOII device via SMS. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 12 of 271...

  • Page 13: Related Documents

    These PDF files are viewable and printable from Adobe Reader. If you do not have the Adobe Reader http://www.adobe.com installed, you can download it from This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 13 of 271...

  • Page 14: General

     In a short time interval individual or multiple units can be tracked at any time or location,  Supports simple to complex alarm settings,  Supports vibration alert when receiving a call, This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 14 of 271...
  • Page 15 You can easily perform configuration and feature changes either via Bluetooth connection or via a TCP-connection. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 15 of 271...

  • Page 16: The Principle Of Firmware Operation

    For such purposes, at first the MAMBOII device must be locally configured (with the help of any terminal program or FALCOM Workbench software – a developed program to This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 16 of 271...
  • Page 17 Bluetooth™-enabled device with the performance of an intelligent and dynamic destination guidance. The Bluetooth feature for This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 17 of 271...

  • Page 18: Internet And Intranet Applications Setup With Mamboii

    Internet. The FALCOM Company does not provide for users any source code for such applications. Figure 2: Internet applications setup with MAMBOII This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 18 of 271...

  • Page 19: Intranet Applications

    Institute of Electrical and Electronics Engineers (IEEE). IEEE 802.14.4 defines the physical layer and media access control (MAC) sub-layer for wireless communications. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 19 of 271...

  • Page 20: Command Syntax , Pfal C

    “;”. The double quotes have to be omitted when you enter the semi-colon. Note that, the maximal This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 20 of 271...
  • Page 21 According to the explanations above, the improved syntax to specify a PFAL command is: $PFAL,<c_type>.<c_index>.<c_subindex>,<parameter>=<value><*CKSUM><CR><LF> $PFAL,<c_type>.<c_index>.<c_subindex>,<parameter>=<value><CR><LF> PFAL,<c_type>.<c_index>.<c_subindex>,<parameter>=<value><*CKSUM><CR><LF> PFAL,<c_type>.<c_index>.<c_subindex>,<parameter>=<value><CR><LF> For example: $PFAL,SYS.Device.Reset*31<CR><LF> $PFAL,Sys.Trigger5<CR><LF> $PFAL,IO.Beep3=hpulse,1000 <CR><LF> $PFAL,IO.Vibration=hpulse,5000;MSG.Send.Serial,0,”Phone is vibrating“<CR><LF> $PFAL,Sys.Timer0.Start=single,5000<CR><LF> $PFAL,Cnf.Set,DEVICE.NAME=”myMAMBOII”<CR><LF> $PFAL,Cnf.Set,AL0=IO.BTN.e0=short:IO.Beep3=hpulse,1000<CR><LF> Optional This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 21 of 271...

  • Page 22: Command Types

    • Also avoid starting of alias with numbers as they might be misinterpreted as original index numbers. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 22 of 271...

  • Page 23: Using Identifiers (Optional)

    $PFAL,Sys.Trigger0;Sys.Trigger5<CRLF> $<Sys.Trigger0><CR><LF> $Trigger0=high<CR><LF> $<Sys.Trigger5><CR><LF> Read commands $Trigger5=low<CR><LF> $SUCCESS<CR><LF> $<end><CR><LF> Respond message type if identifiers are Responses structure used. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 23 of 271...
  • Page 24 • If identifiers are submitted within PFAL commands, they will be sent back inside the PFAL responses. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 24 of 271...

  • Page 25: Pfal Commands

    Stops a running timer 3.2.1.4.3 $PFAL,Sys.Timer<index>.Pause Pauses (suspends) a running timer 3.2.1.4.4 $PFAL,Sys.Timer<index>.Resume Restarts the execution of a paused timer 3.2.1.4.5 This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 25 of 271...
  • Page 26 $PFAL,Sys.BT.Enable Powers on Bluetooth module 3.2.1.12.1 $PFAL,Sys.BT.Disable Powers off Bluetooth module 3.2.1.12.2 $PFAL,Sys.BT.Reset Resets Bluetooth module 3.2.1.12.3 This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 26 of 271...
  • Page 27 Enables/Disables the low power mode of GPS $PFAL,GPS.Nav.PowerSave=<on>,<onTime>,<lpTime> 3.2.4.1.8 receiver. Records a GPS position data into the history $PFAL,GPS.History.Write,<add_prot_to_memory>,<”text”> 3.2.4.2.1 memory This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 27 of 271...
  • Page 28 Retrieves all outbox SMS messages 3.2.5.3.4 Clears all outbox SMS messages (SMS memory for $PFAL,GSM.SMS.Outbox.Clear 3.2.5.3.5 outgoing messages) This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 28 of 271...
  • Page 29 Retrieves the modules versions of the target device 3.2.7.3.2 Retrieves the internal communication version of the $PFAL,MSG.Version.InternalComm 3.2.7.3.3 target device This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 29 of 271...
  • Page 30 Places both Bluetooth devices in the connection $PFAL,BT.Audio.Connect 3.2.9.1.2 $PFAL,BT.Audio.Disconnect Closes a currently open audio connection 3.2.9.1.3 Table 5: Complete list of PFAL commands. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 30 of 271...

  • Page 31: Sys" Command Type

    PFAL commands if they know the phone number of the device. No other PFAL command is accepted by the system MAMBOII, if it This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 31 of 271...

  • Page 32: Sys.security.removelock,"Password" - Sends A Password To Remove Locking Of Your System

    It specifies the password (string type) to be removed. It consists of a string with a length up to 50 characters. To remove the system lock, the last locking password must be used. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 32 of 271...

  • Page 33: Rupdate" Command Index

    Previously stored firmware data is not erased This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 33 of 271...

  • Page 34: Sys.rupdate.datamode, - Defines Transfer Channel & Continues Upgrading

    Received via a CSD call (GSM datacall) Note: • This command can be executed anytime after a remote update has been initiated (Rupdate.Init) This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 34 of 271...

  • Page 35: Binary Update Commands

    - the textual hexadecimal value of <id> ( i.e. <id>=0xA9 <txt_id> = "A9") <txt_cmd> - the textual hexadecimal value of <cmd> 3.2.1.2.2.2 List of binary commands This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 35 of 271...
  • Page 36 0xFFFF for the very last sector containing a configuration - the maximum value this sector 0x7FFF. − leave empty This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 36 of 271...

  • Page 37: Sys.rupdate.finish - Finishes Remote Update

    (because it will start with default settings) • This command doesn't create a PFAL answer if successful executed (just in case of an error). This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 37 of 271...

  • Page 38: Device" Command Index

    • No responses will be delivered from the MAMBO device to the user. • How to upgrade the MAMBOII to a new firmware version, refer to the “MamboII_firmware_update.pdf”. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 38 of 271...

  • Page 39: Sys.device.shutdown - Shutdown The System

    The MAMBOII appears to be off when it goes to sleep, but it can still respond to wakeup events. Wakeup events can occur when the device receives an input signal, such as a ring call or SMS, or when software requests that the device wake up at a predetermined time etc.
  • Page 40 Note: Do not use the TIMER-SLEEP parameter alone. It is recommanded to combine it with the IGN-SLEEP parameter. <timeout> This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 40 of 271...
  • Page 41 00:00:00 to 99:59:59. Sleep time specified as <hh>:<mm>:<ss>. Notes • During the system MAMBOII is going into one of the sleep modes, it will kill all running tasks as smoothly as it can. The internal software checks/generates and calls the following instances: ...

  • Page 42: Sys.device.clearalarm - Clears Existing Alarms And Restart The Device

     Events will be displayed  Alarm states can be checked using the MSG.Info.Alarm command This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 42 of 271...
  • Page 43 • However, it is not possible to easily change other system states such as device speed, connection states etc.. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 43 of 271...

  • Page 44: Timer" Command Index

    Initiates periodically when the specified timer<index> cyclic starts. Its raised event can be used to execute an action regularly. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 44 of 271...

  • Page 45: Sys.timer.Start=- Starts/Restarts Timers

    It can be set to: single Performs a single execution. it allows an action to be performed just once. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 45 of 271...

  • Page 46: Sys.timer.Stop- Stop Running Timers

    Determines the index of the timer to be paused. Up to 20 Timers are available. It can be set to a value from to 19. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 46 of 271...

  • Page 47: Sys.timer.Resume- Restarts The Execution Of Paused Timers

    Determines the index of the timer to be disarmed. Up to 20 Timers are available. It can be set to a value from to 19. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 47 of 271...

  • Page 48: Sys.timer.Erase - Erases Timer Settings

    ALIAS.STORAGE<storage_index>=<alias_name>. Read the description of given in the table of abbreviations. ”storage index” This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 48 of 271...

  • Page 49: Sys.timer.Load- Loads Timers With Storage Contents

    It can be set to a value from to 19. Notes • The retrieved timer states are comma separated. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 49 of 271...

  • Page 50: Trigger" Command Index

    Determines the index of the trigger to be read. Up to 20 Triggers are available. It can be set to a value from to 19. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 50 of 271...

  • Page 51: Sys.trigger.Save- Saves Trigger State To Storage Index

    Read also the description of storage index given in the table of abbreviations. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 51 of 271...

  • Page 52: Counter" Command Index

    19. <value> 32-bit integer value from to 2147483647. Sets the value of the specified Counter<index>. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 52 of 271...

  • Page 53: Sys.counter.Increment= - Increments Counter's Value

    2147483647. It decrements (it counts down from the initial set value toward 0) the value of the specified Counter<index> by a given number <dec_value>. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 53 of 271...

  • Page 54: Sys.counter.State - Reads Counter's State

    ALIAS.STORAGE<storage_index>=<alias_name>. Read also the description of storage index given in the table of abbreviations. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 54 of 271...

  • Page 55: Sys.counter.Load- Loads Counters With Storage Contents

    Determines the index of the counter to be cleared. Up to 20 Counters are available. It can be set to a value from to 19. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 55 of 271...

  • Page 56: Macro" Command Index

    If the time-span between two macro activations is too short, then only a part of set commands within a macro might be executed twice. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 56 of 271...

  • Page 57: Gsm" Command Index

    This input command resets the GSM engine, if it is currently powered on. The event SYS.GSM.eEnable occurs when the GSM engine restarts. Parameter description None. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 57 of 271...

  • Page 58: Gps" Command Index

    GSM engine restarts. This command can be executed, for example, when the GPS engine reports error during the runtime. Parameter description None. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 58 of 271...

  • Page 59: Userevent" Command Index

    System behaviour can be very unpredictable and complex. • Therefore no support will be provided for configurations that contain UserEvents. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 59 of 271...

  • Page 60: Bat" Command Index

    Indicates that the battery is currently discharging. battery is discharging Indicates that the battery is currently charging. battery is charging Parameter description None. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 60 of 271...

  • Page 61: Bt" Command Index

    False, «Sys.BT.sDisconnected» which prevents disabling the Bluetooth module whereas the MAMBOII remains running at full functionality. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 61 of 271...

  • Page 62: Sys.bt.reset - Resets The Bluetooth Chip

    Command description This command resets immediately Bluetooth moule. event SYS.BT.eEnable occurs when the BT restarts. Parameter description None. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 62 of 271...

  • Page 63: Cpu" Command Index

    Bluetooth module is turned off and during startup will be turned on again. Parameter description None. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 63 of 271...

  • Page 64: Ieee" Command Index

    IEEE restarts. It can be executed, for example, when the IEEE hardware reports error during the runtime. Parameter description None. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 64 of 271...

  • Page 65: Display" Command Type

    Displays the Milemeter view (graphically displays in VIEW_MILOMETER miles the current distance travelled from a start point) This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 65 of 271...

  • Page 66: Display.dialog - Creates A Full-Screen Dialog Box

    <”text”> can be entry changed to: “text&(<entry >)text&(<entry >)text…&(<entry >)“ This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 66 of 271...

  • Page 67: Display.alarm - Displays A Specific Alarm Image On The Screen

    Displays a keyfob image (e.g. when a keyfob results KEYFOB connected) Displays a geofence image (e.g. when leaving/entering a GEOFENCE Geofence or Area). This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 67 of 271...
  • Page 68 Specify the string containing the message that will be displayed on the screen together with the specified image. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 68 of 271...

  • Page 69: Cnf" Command Type

    3.1.4, page 23. To show the default settings of the MAMBOII device, refer to the chapter page 260. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 69 of 271...
  • Page 70 Specifies the typeface of the font available on the device. 3.2.11.5 DISP.MESSAGE<index> Specifies the text for SMS. 3.2.11.6 This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 70 of 271...
  • Page 71 GSM.PROFILE.CURRENTAUDIO Loads a specific audio profile for using a headset 3.2.20.10 GPRS configuration Settings This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 71 of 271...
  • Page 72 100 Geofence zones Alarm Configuration Setting AL<index> Specifies a powerful multi-configuration and reporting 3.2.25 This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 72 of 271...
  • Page 73 (if default exists). • The default settings of the firmware version 2.4.0 are given in chapter page 260. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 73 of 271...

  • Page 74: Cnf.get, - Get Configuration Settings From Device

    Sys.Bat.eLow 3.2.10.8 will be generated. Reads out the GPS auto correction settings of the DEVICE.GPS.AUTOCORRECT 3.2.10.10 target device This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 74 of 271...
  • Page 75 Up to 10 macro indices in a range of 0 to 9 can 3.2.14.4 be queries. IO configuration setting This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 75 of 271...
  • Page 76 GPRS network Reads out the authentification method used over PPP.AUTH 3.2.22.4 PPP. TCP Configuration Settings This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 76 of 271...
  • Page 77 Notes • The default settings of the firmware version 2.4.0 are given in chapter page 260. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 77 of 271...

  • Page 78: Cnf.clear, - Clears All Settings In A Parameter

    If many configuration settings have to be erased, this command might need several seconds to complete the process. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 78 of 271...

  • Page 79: Cnf.showuser - Shows User Specified Settings

    This command delivers all default parameter names. See default settings listed in chapter page 260. Parameter description none. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 79 of 271...

  • Page 80: Cnf.show - Shows All Used Parameters

    “myMAMBOII” . If the user has cleared a parameter value, the default value will be shown. • This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 80 of 271...

  • Page 81: Cnf.search, - Searches For A Parameter Name

    (""). The text to be searched can be one of the parameter names listed in chapter 3.2.10, page 143. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 81 of 271...

  • Page 82: Io" Command Type

    Specifies the number of milliseconds to generate a beep. <low_time> Specifies the number of milliseconds to disable the beep. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 82 of 271...

  • Page 83: Vibration" Command Index

    Specifies the number of milliseconds to generate a beep. <low_time> Specifies the number of milliseconds to disable the beep. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 83 of 271...

  • Page 84: Gps" Command Type

    Each memory buffer index can be updated with new data or the available data on them can be erased. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 84 of 271...

  • Page 85: Gps.nav.position=Save - Moves Gps Position Data From Buffer To Storage Index

    Each storage index has a fixed size space and each of them can be updated with new data. Read also the description of storage index given in the table of abbreviations. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 85 of 271...

  • Page 86: Gps.nav.position=Load - Loads Gps Data From Storage To Buffer Index For Temporarily Use

    MAMBOII stores internally a start point. The stored distance, which is based on a point-to-point calculation, results automatically updated once the vehicle (equipped with a MAMBOII) starts moving. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 86 of 271...

  • Page 87: Gps.nav.distance= - Sets/Resets The Distance To A User Value

    Due to the non volatile memory is limited to several 100'000 write operations, it is strongly recommended to prevent periodically saving of last valid position in a short amount of time. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 87 of 271...

  • Page 88: Gps.nav.powersave=,, - Enables/Disables The Low Power Mode

    For optimum performance, it is recommended to use either 300 ms onTime • and 1000 ms lpTime or 400 ms onTime and 2000 ms lpTime. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 88 of 271...

  • Page 89: History" Command Index

    (a portion of FLASH which uses 960 Kbytes memory size). When the MAMBOII unit has obtained a GPS Fix, it is capable of saving up to 245.715 position records in its history memory space. The History function works on what is called a FIFO principal: First in, first out, it means when the memory space has been used up, the oldest records will automatically be deleted to make space for new incoming data.

  • Page 90: Gps.history.clear- Clears The History Memory

    $history cleared (duration: 3,750 seconds) Responses Command description This command clears all records available in the history memory. Parameter Description None This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 90 of 271...

  • Page 91: Gps.history.getstart- Shows The Oldest Date Stored In The History Memory

    Specifies the end date. Its format is DD.MM.YYYY Value Meaning Represents the day as a number w (1-31) Represents the month as a number (1-12). This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 91 of 271...

  • Page 92: Gps.history.read - Downloads The Selected History Records In Parts

    All selected records (block of records) will not be transmitted at once, except if the size of the selected records is 512 bytes or smaller. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 92 of 271...

  • Page 93: How To Read The History Records In Textual Format

    Longitude, a double value in decimal degrees format. dd.m 600.9 Altitude, an approximate height value (0 … 8000) above sea level in This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 93 of 271...
  • Page 94 * Latitude South and Longitude West have negative value indicated by sign minus “ - “ Table 8.1: A complete set of extensions. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 94 of 271...

  • Page 95: Further Notes For Converting History Data With Special Remark To Data/Event Logging Features

    This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 95 of 271...

  • Page 96: Gps.history.push - Downloads The Selected History Records At Once

    It defines the format of the history (logged) data to be downloaded at once via defined channel <msg_output>. It can be set to: This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 96 of 271...
  • Page 97 It is also not possible to accept a voice call or send/receive SMS for instance. • Responses this command same responses GPS.History.Read. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 97 of 271...

  • Page 98: Geofence" Command Index

    Responses $park position removed Command description This command removes an active park area (GF.0). Parameter Description none Notes This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 98 of 271...
  • Page 99 2.4.0_ 1.0.0 ONFIGURATION OMMAND IRMWARE EVISION BETA ERSION • The event GPS.GF.e0=inside and GPS.AREA.e0=inside are no longer available. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 99 of 271...

  • Page 100: Gps.geofence.geostate, - Gets The State Of A Geofence

    Specifies the ID-number of an area. It can be set to a value from to 31. Only areas that are already established are readable. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 100 of 271...

  • Page 101: Gsm" Command Type

    $IMEI:357023000327552 Responses Command description This command returns the serial identification number of the target device. Parameter Description None This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 101 of 271...

  • Page 102: Gsm.simid - Get The Id Of Sim Card

    This command requests the account information (i.e. account balance) of the used prepaid SIM card, if the provider supports this. Parameter Description None This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 102 of 271...

  • Page 103: Voice Call" Command Index

    $PFAL,GSM.VoiceCall.Hangup $PFAL,GSM.VoiceCall.Hangup Examples E.g. Responses $call finished Command description This command terminates an established call. Parameter Description None This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 103 of 271...

  • Page 104: Gsm.voicecall.audio.profile= - Sets The Active Audio Profile

    The volume of ring tone, varies from low to high (0 ... 4). Value Meaning Mute Very low Middle High This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 104 of 271...

  • Page 105: Gsm.voicecall.volume.speaker=,, - Sets Or Gets The Loudspeaker Settings

    It specifies the negative gain (attenuation) of the input signal on the microphone. The range of value can be set to a value from to 32767. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 105 of 271...

  • Page 106: Sms" Command Index

    Longer <”text”> results less protocols can be attached to the SMS message. Only protocols, which fit in completely, are added to the SMS. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 106 of 271...

  • Page 107: Gsm.sms.inbox.state - Shows Inbox Sms

    Responses $Outbox cleared Command description This command deletes all unsent SMS from the outbox storage. Parameter Description None This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 107 of 271...

  • Page 108: Data Call" Command Index

    Examples Responses Command description Accepts an incoming Data call detected from an incoming ring event. Parameter Description None This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 108 of 271...

  • Page 109: Gsm.datacall.hangup - Hangs Up An Active Voice Call

    MAMBOII is still trying to detach. If an attachment is issued during a running detach that message is ignored. Parameter description none. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 109 of 271...

  • Page 110: Gsm.gprs.state - Gets The Gprs Status

    2147483647 Notes • To delete the GPRS traffic counter set all values to “0” zero. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 110 of 271...

  • Page 111: Tcp" Command Type

    MAMBOII is not able to initiate a TCP connection even if the TCP settings are correctly set. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 111 of 271...

  • Page 112: Tcp.client.send,,<"Text"> - Transfers A Tcp Packet To The Connected Server

    Examples e.g. $current TCP state:disabled Responses Command description This message requests the TCP connection state. Parameter description None. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 112 of 271...

  • Page 113: Tcp.client.disconnect - Disconnects From Tcp Server

    0 (zero) instead of 1 (one), otherwise the MAMBOII will try to reconnect automatically, after each TCP disconnection, This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 113 of 271...

  • Page 114: Storage" Command Index

    This command clears the contents of the TCP storage. Use this command to discard unwanted information and empty the TCP storage completely (without sending its data away). Parameter description none. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 114 of 271...

  • Page 115: Tcp.storage.addprotocol,,<"Text"> - Addes Data To The Tcp Storage

    TCP history buffer and it will be sent as soon as the TCP connection is re- established. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 115 of 271...

  • Page 116: Tcp.storage.addrecord,,<"Text"> - Appends A Binary Dataframe To The Tcp Storage

    In order to attach more than one additional information at once, enter the sum to <add_protocols> determined by adding the corresponding hex value of each additional information, for example: This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 116 of 271...
  • Page 117 Also invalid data can be written into the TCP storage, which stands in contrast to the command. GPS.History.Write This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 117 of 271...

  • Page 118: Smtp" Command Index

    $PFAL,TCP.SMTP.Sen "on &(Date) &(Time) it is moving &(Speed) m/s" Dynamic entries are listed in chapter page 243. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 118 of 271...
  • Page 119 Do not try to send another email without getting response from the prior one. After the email has been sent successfully, a new mail can be sent with this command. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 119 of 271...

  • Page 120: Msg" Command Type

    The format the device uses send protocols entered text configuration-dependent. DEVICE.PFAL.SEND.FORMAT This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 120 of 271...

  • Page 121: Msg.send.rawserial,,<"Text"> - Redirects Command Responses To The Serial Interface In Unformatted Data Structure

    Bluetooth, CSD or TCP communication channel, but results are redirected to the serial line. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 121 of 271...

  • Page 122: Msg.send.csd,,<"Text"> - Redirects Command Responses To Csd Channel

    This command can be sent through Bluetooth, CSD or TCP channel, but results are always routed to the remote modem via an This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 122 of 271...

  • Page 123: Msg.send.tcp,,<"Text"> - Redirects Command Responses To Tcp Channel

    TCP server. This command can be sent through Bluetooth, CSD or TCP channel, but results are always routed to the TCP remote server. The format the This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 123 of 271...
  • Page 124 If the TCP connection is currently not established, this data will be written into the TCP buffer, which will be sent out as soon as the TCP connection will be re-established. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 124 of 271...

  • Page 125: Mode" Command Index

    <msg_out_chan>. Add the sum or one hexadecimal number corresponding to the message to be transmitted without leading “0x“. Value Meaning This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 125 of 271...
  • Page 126 SMS. If the SMS communication is also disabled, the system cannot be reconfigured anymore. A Firmware This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 126 of 271...

  • Page 127: Msg.mode.csd=, - Defines The Communication Mode On Csd Channel

    In this mode user messages without leading “PFAL” can be used. However, if <out_sys_messages> is greater than 0, the selected messages will be transmitted This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 127 of 271...

  • Page 128: Msg.mode.tcp=, - Defines The Communication Mode On Tcp Channel

    “0x“. Value Meaning Transmits GPSTATE. 0x01 Transmits GPERROR. 0x02 Transmits GPACTION. 0x04 This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 128 of 271...
  • Page 129 A Firmware update is necessary to exchange information (enable communication) with it again. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 129 of 271...

  • Page 130: Version" Command Index

    This command returns the internal communication version of the device. It responds with a version number. Parameter description None. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 130 of 271...

  • Page 131: Msg.version.hardwarerev - Gets The Hardware Revision Of The Target Device

    E.g. Responses $SoftwareID: MAMBO2_GPRS Command description This command returns the ID of the used software. Parameter description none. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 131 of 271...

  • Page 132: Info" Command Index

    If you want to output also any system state (dynamic entry) when the command is executed, the syntax of the <”text”> can be changed to: This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 132 of 271...

  • Page 133: Msg.info.time - Gets The Current System Time

    In order to retrieve a valid date, time week number and weekday, the device must have a valid GPS fix. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 133 of 271...

  • Page 134: Msg.info.alarm, - Shows The Configuration Of An Alarm

    This command can be used to check even most complex alarm configurations step by step to validate the desired behaviour. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 134 of 271...

  • Page 135: Channel" Command Index

    • To leave this mode, just restart the MAMBO unit. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 135 of 271...

  • Page 136: Ieee" Command Type

    Turns ON the LED<lindex> for a specified interval <>, in hpulse,<> milliseconds. <high_time> Specifies the number of milliseconds for ON-time period. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 136 of 271...

  • Page 137: Ieee.keyfob.Beep= - Generates Beep Tones On A Keyfob Device

    Generates a single beep for a specified interval hpulse,<high_time> <high_time> in milliseconds. <high_time> Specifies the duration, in milliseconds, of the beep. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 137 of 271...

  • Page 138: Ieee.keyfob.Vibration= - Generates Vibration On A Keyfob Device

    Makes a device vibrates for a specified interval <> hpulse,<high_time> in milliseconds. <high_time> Specifies the duration, in milliseconds, of the vibration. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 138 of 271...

  • Page 139: Iobox" Command Index

    I/O-BOX device being selected. You could specify an index value of an I/O-BOX device that is already connected to This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 139 of 271...

  • Page 140: Ieee.iobox.Bat.level - Gets Battery Charge State

    The <ib_div_ndex> index should correspond to one of the <cnf_ib_div_index> indexes that you have assigned on the the I/O-BOX configuration setting. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 140 of 271...

  • Page 141: Bt" Command Type

    MAMBOII and other devices (such as PC, PDA, etc.) over a radio link instead of a cable. If you are transferring data from MAMBOII to PC or PDA and vice versa, you will also be able to place a GSM call. Before you create a connection between MAMBOII and your Headset, you must have the following information: •...

  • Page 142: Bt.audio.disconnect - Closes A Currently Open Audio Connection

    Command description Use this command to close a currently open audio connection to your headset. Parameter description none This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 142 of 271...

  • Page 143: Set Or Query Device Configuration Settings

    No user-settings will be updated in the FLASH memory, if there are differences between upper- and lower-case letters. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 143 of 271...

  • Page 144: Device Parameters

    (unidirectional communication). How to set/get Device configuration: $PFAL,Cnf.Set,DEVICE.CMD.PFAL.EN=A Set configuration $PFAL,Cnf.Get,DEVICE.CMD.PFAL.EN Get configuration This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 144 of 271...

  • Page 145: Device.comm.serial

    &SerialData 0x01 Redirects data to the serial channel. 0x02 Redirects data to the CSD channel. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 145 of 271...
  • Page 146 A Firmware update is necessary to exchange information with it again. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 146 of 271...

  • Page 147: Device.comm.csd

    Transmits GPACTION. 0x04 Transmits GPEVENT. 0x08 How to set/get Device configuration: $PFAL,Cnf.Set,DEVICE.COMM.CSD=cmd,0 Set configuration $PFAL,Cnf.Set,DEVICE.COMM.CSD=data=8,0 $PFAL,Cnf.Get,DEVICE.COMM.CSD Get configuration This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 147 of 271...

  • Page 148: Device.comm.tcp.client

    Redirects data to the serial channel. 0x02 Redirects data to the CSD channel. 0x04 Redirects data to the TCP channel. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 148 of 271...

  • Page 149: Device.igntimeout

    • If the <time_out> value is set to 0 (zero), the system goes to sleep immediately. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 149 of 271...

  • Page 150: Device.bat.mode

    In case of firmware update it is recommended to set this parameter to and then update the firmware as usual. DEVICE.BAT.MODE=auto This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 150 of 271...

  • Page 151: Device.gps.startup

    (corrected) GPS record. The difference of both distances may not exceed the specified value <dist_error>. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 151 of 271...

  • Page 152: Device.gps.cfg

    This setting specifies the timeout to wait before the GPS part performs a hard reset, if there is no valid GPS fix. This will force the MAMBOII to reset the GPS engine for satellite reacquisition. This configuration will help the MAMBOII to reacquire valid GPS position in areas with very poor GPS signal quality.

  • Page 153: Device.gsm.startup

    Determines whether to switch on or off the IEEE component during start-up. It can be set to: Value Meaning Switched on during start-up. Switched off during start-up. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 153 of 271...

  • Page 154: Device.bt.startup

    Specifies the MAC address (12 byte long) of the Bluetooth headset to be used. It can be set to if unknown. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 154 of 271...

  • Page 155: Device.pfal.send.format

    PFAL responses). The CRLF will be <end> added automatically at the end of the defined „end message“ This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 155 of 271...
  • Page 156 The messages the system MAMBOII sends out will look in this order: $MAMBOII outputs its GPS positions&<CRLF> $GPRMC..*21&<CRLF> <end><CRLF> This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 156 of 271...

  • Page 157: Disp Parameter

    DISP.PHONE<index>). Displays the info view. VIEW_INFO How to set/get display configuration: VIEW_SAT $PFAL,Cnf.Set,DISP.VIEW1= Set configuration $PFAL,Cnf.Get,DISP.VIEW1 Get configuration This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 157 of 271...

  • Page 158: Disp.menu

    You can not create a second level submenu without having a first level submenu before it. If you try to do it the second level submenu will not be shown. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 158 of 271...
  • Page 159 $PFAL,CNF.Set,DISP.MENU2.2.1=GSM-Reset:Sys.GSM.Reset $PFAL,CNF.Set,DISP.MENU2.2.2=GSM-OFF:Sys.GSM.Disable $PFAL,CNF.Set,DISP.MENU2.2.3=GSM-ON:Sys.GSM.Enable $PFAL,CNF.Set,DISP.MENU2.3.0=GPS $PFAL,CNF.Set,DISP.MENU2.3.1=GPS-Reset:Sys.GPS.Reset $PFAL,CNF.Set,DISP.MENU2.3.2=GPS-OFF:Sys.GPS.Disable $PFAL,CNF.Set,DISP.MENU2.3.3=GPS-ON:Sys.GPS.Enable $PFAL,CNF.Set,DISP.MENU2.3.4=SaveAlmanac:GPS.Nav.SaveAlmanac $PFAL,CNF.Set,DISP.MENU2.4.0=Bluetooth $PFAL,CNF.Set,DISP.MENU2.4.1=Bluetooth-ON:Sys.BT.Enable $PFAL,CNF.Set,DISP.MENU2.4.2=Bluetooth-OFF:Sys.BT.Disable $PFAL,CNF.Set,DISP.MENU3.0=SMS $PFAL,CNF.Set,DISP.MENU3.1.0=Send-SMS $PFAL,CNF.Set,DISP.MENU3.1.1=Raul:GSM.SMS.Send,"+491111111",8,"John" $PFAL,CNF.Set,DISP.MENU4=Beep:IO.Beep1=hpulse,1000 $PFAL,Cnf.Get,DISP.MENU3.0 Get configuration This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 159 of 271...

  • Page 160: Disp.phone

    Color of text in menus. Color of lines on the screen. Color of satellites that are being used. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 160 of 271...

  • Page 161: Disp.font

    System monitors keystrokes and then starts the screen saver after a period of inactivity. <mode> Specifies the mode of screen saver. It can be set to: Value Meaning This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 161 of 271...

  • Page 162: Disp.tz

    How to set/get display configuration: $PFAL,Cnf.Set,DISP.TZ=UTC+2.0 //for Germany Set configuration $PFAL,Cnf.Set,DISP.TZ=UTC-7.0 //for Los Angeles (USA) $PFAL,Cnf.Get,DISP.TZ Get configuration This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 162 of 271...

  • Page 163: Ieee Parameter

    The MAC address is given on the sticker on the back inside the Keyfob ( open the ). Every Keyfob device has an unique MAC address. tray and remove batteries This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 163 of 271...

  • Page 164: Ieee.iobox

    It defines the mode for requesting the status of the digital inputs operation. It can be set to: Value Meaning No status request. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 164 of 271...
  • Page 165 To delete/remove an existing device, set the MAC address to zero, for example: PFAL,cnf.set,IEEE.IOBOX2=0,0,0,0,0,0000000000000000. • Disable Enable IEEE chip inside manually (using accordingly) after your IEEE-specified PFAL,Sys.IEEE.[Disable,Enable] configuration completes This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 165 of 271...

  • Page 166: Replace Parameter

    It specifies the text to be replaced - with a maximum length of 200 characters. How the configuration could be set/requested: $PFAL,Cnf.Set,REPLACE0=+1234567 Set configuration $PFAL,Cnf.Get, REPLACE0 Get configuration This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 166 of 271...
  • Page 167 • Replacement marks may be placed JUST within alarm configurations (i.e. each configuration which starts with "AL<x>=" This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 167 of 271...

  • Page 168: Optional Settings

    PFAL.Cnf.Set without given any text and read using PFAL.Cnf.Get. <text> Specifies the text to be stored to non-volatile memory. Up to 250 characters are allowed. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 168 of 271...

  • Page 169: Macro

    Keep in mind that, some configuration parameters (such as „MACRO“ ) are case sensitive, while all commands are case insensitive. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 169 of 271...

  • Page 170: Io Parameter

    Switched on during start-up. Switched off during start-up. How to set/get device configuration: $PFAL,Cnf.Set,IO.BEEP.ENABLE=on Set configuration $PFAL,Cnf.Get,IO.BEEP.ENABLE Get configuration This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 170 of 271...

  • Page 171: Motion Parameter

    [IO.Motion.eStanding]). How to set/get Motion configuration: Set configuration 4,20,10,2 $PFAL,Cnf.Set,MOTION.FILTER= Get configuration $PFAL,Cnf.Get,MOTION.FILTER Figure 6: Filtering in motion This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 171 of 271...

  • Page 172: Alias Parameter

    It specifies the value of the system-debugging mode. It can be: Value Meaning Disables debugging mode. Enables debugging mode. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 172 of 271...
  • Page 173 1.0.0 ONFIGURATION OMMAND IRMWARE EVISION BETA ERSION How to set/get DBG configuration: $PFAL,Cnf.Set,DBG.EN=1 Set configuration $PFAL,Cnf.Get,DBG.EN Get configuration This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 173 of 271...

  • Page 174: Prot Parameters

    Enables the selected message. Disables the selected message. How to set/get Protocol configuration: $PFAL,Cnf.Set,PROT.GGA=1 $PFAL,Cnf.Set,PROT.RMC=1 Set configuration $PFAL,Cnf.Set,PROT.BIN=1 $PFAL,Cnf.Get,PROT.GGA Get configuration This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 174 of 271...

  • Page 175: Prot.start.bin

    BIN protocol, including the dollar sign “$”. How to set/get Protocol configuration: $PFAL,Cnf.Set,PROT.START.BIN=$user bin Set configuration Get configuration $PFAL,Cnf.Get,PROT.START.BIN This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 175 of 271...

  • Page 176: Gsm Parameters

    It allows you to enable and disable the caller identification. Following values can be set: Value Meaning Disables caller identification (CLIP + CLIR) Enables caller identification (CLIP + CLIR) This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 176 of 271...

  • Page 177: Gsm.calltone.enable

    <interval>. Note: If field strength drops just for a short time, the GSM engine will not be reset. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 177 of 271...

  • Page 178: Gsm.operator.blacklist

    Specifies the whitelist of the GSM operator names considered to be acceptably during GSM registration attempts. Up to 20 operator names separated by commas This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 178 of 271...

  • Page 179: Gsm.sms.response

    It defines the number of SMS responses. Following values can be set: Value Meaning 1.. the number of SMS responses !!!! This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 179 of 271...

  • Page 180: Gsm.ringtone

    Set configuration $PFAL,Cnf.Get,GSM.RINGTONE Get configuration Notes • If no optional parameter is entered, the old value will be kept. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 180 of 271...

  • Page 181: Gsm.profile.audio

    The range of value can be set to a value from to 32767. How to set/get GSM configuration: $PFAL,Cnf.Set,GSM.PROFILE.AUDIO1=1,3,16000,0,5,28000 Set configuration $PFAL,Cnf.Get,GSM.PROFILE.AUDIO1 Get configuration This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 181 of 271...

  • Page 182: Gsm.profile.currentaudio

    (i.e. the index of the is not available/configured) <prof_index> GSM.PROFILE.AUDIO the index remains unloaded and system returns an error. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 182 of 271...

  • Page 183: Gprs Parameters

    GPRS. How to set/get GPRS configuration: $PFAL,Cnf.Set,GPRS.AUTOSTART=1 Set configuration $PFAL,Cnf.Get,GPRS.AUTOSTART Get configuration This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 183 of 271...

  • Page 184: Gprs.qosmin

    Non real-time traffic, error-sensitive application that can cope with data loss Real-time traffic, error-sensitive application that can cope with data loss This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 184 of 271...
  • Page 185 $PFAL,Cnf.Get,GPRS.QOSMIN Get configuration Notes • If the value is omitted, then it is set to the default value. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 185 of 271...

  • Page 186: Gprs.qos

    Real-time traffic, error-sensitive application that can cope with data loss Real-time traffic, error non-sensitive application that can cope with data loss This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 186 of 271...
  • Page 187 $PFAL,Cnf.Get,GPRS.QOS Get configuration Notes • If the value is omitted, then it is set to the default value. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 187 of 271...

  • Page 188: Gprs.dial

    By default, this value is set to 10. It means, GPRS restarts every 10 minutes if there is no TCP communication currently established. How to set/get GPRS configuration: PFAL,Cnf.Set,GPRS.TIMEOUT=1,600000 Set configuration PFAL,Cnf.Get,GPRS.TIMEOUT Get configuration This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 188 of 271...

  • Page 189: Ppp Parameters

    0. <time> It specifies the amount of time, in milliseconds, for sending a ping to the GPRS network. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 189 of 271...

  • Page 190: Ppp.auth

    Only CHAP authorization method is used. chap How the configuration could be set/requested: Set configuration AUTH $PFAL,Cnf.Set,PPP. =auto Get configuration AUTH $PFAL,Cnf.Get,PPP. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 190 of 271...

  • Page 191: Tcp Parameters

    All values are separated by commas “,”. • Contact your network administrator to specify a correct server IP address and • port number. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 191 of 271...

  • Page 192: Tcp.client.alternative

    All values are separated by commas “,”. • Contact your network administrator to specify a correct server IP address and port number. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 192 of 271...

  • Page 193: Tcp.client.ping

    It specifies the length of time (in milliseconds) to wait between two connection attempts. How to set/get TCP configuration: $PFAL,Cnf.Set,TCP.CLIENT.TIMEOUT=240000,60000 Set configuration $PFAL,Cnf.Get,TCP.CLIENT.TIMEOUT Get configuration This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 193 of 271...

  • Page 194: Tcp.client.dns.timeout

    MAMBOII to the remote server. How to set/get TCP configuration: $PFAL,Cnf.Set,TCP.CLIENT.LOGIN=1 Set configuration Get configuration $PFAL,Cnf.Get,TCP.CLIENT.LOGIN This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 194 of 271...

  • Page 195: Tcp.storage

    How the configuration could be set/requested: $PFAL,Cnf.Set,TCP.CLIENT.SENDMODE=0 Set configuration Get configuration $PFAL,Cnf.Get,TCP.CLIENT.SENDMODE This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 195 of 271...

  • Page 196: Tcp.smtp.connect

    <”domain”> String type. It specifies the domain name from the Internet address. For example “fal.de”. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 196 of 271...

  • Page 197: Tcp.smtp.from

    How the configuration could be set/requested: $PFAL,Cnf.Set,TCP.SMTP.FROM=”user4@yahoo.com” Set configuration Get configuration $PFAL,Cnf.Get,TCP. SMTP.FROM This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 197 of 271...

  • Page 198: Gf Parameter (Geofences)

    This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 198 of 271...

  • Page 199: Set Up The Geofencing Zones And Areas

    *. geographic boundaries are set automatically from a collection of set Geofences This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 199 of 271...

  • Page 200: Gf.config

    50°42’41” bigger than 50°40’16”.  After the user has set up a Geofence zone into the MAMBOII device, it starts comparing the current location with the location geofence zone. If there is any disagreement to the configuration, MAMBOII will send notification via SMS or TCP packet etc. (including alarm information) depending on the configuration.

  • Page 201: Gf.area

    (). The purpose of GeoFences is that all entries and exits of the MAMBOII unit into or out of a pre-set area will trigger events and based on these events the user can be notified. The MAMBOII device can hold up to 100 GeoFences (in arrange of 0 to 99) setup either as a rectangle or as a point with radius zone.
  • Page 202 Specifies the latitude, in decimal format. <alt> Specifies the latitude, in meter. This value corresponds to the centre of the set circle. <radius> This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 202 of 271...
  • Page 203 GF.AREA4, so that the set value of area<flag> is the hexadecimal values of (^=10) corresponding to area10. GF.AREA4 This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 203 of 271...
  • Page 204 GF.AREA2 (^=4) (^=10) corresponding to areaE. GF.AREA4 This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 204 of 271...
  • Page 205 <p_value> value, the is automatically set up and attached to parameter, if the command is GF.AREA0 $PFAL,GPS.Geofence.Park.Set executed. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 205 of 271...

  • Page 206: Al Parameter (Alarm Configuration)

    This information is returned only within the PFAL response, which is not available for alarm commands  To sent information automatically use “MSG.Send” commands, see chapter 3.2.7.1, page 120. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 206 of 271...

  • Page 207: Al= : -Set Alarm Configuration

    For example: Alarm declaration: $PFAL,Cnf.Set,AL0=IO.BTN.e0=short:TCP.Client.Send,48,“Current GPS information “  MAMBOII will transmit a TCP packet to the connected remote server including the current GPS position of the device ($PFAL,TCP.Client.Send,48,“Current GPS information“), when,  user presses short the Button 0 (B1). Once the B1 is short pressed, the “IO.BTN.e0=short”...
  • Page 208 (every 1 second). Once they are True, the specified actions will be permanently released, so please This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 208 of 271...
  • Page 209 IO events/states IO.Motion It provides the events and states of the 3.2.25.1.1.4.1 device motion and shows the event and This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 209 of 271...
  • Page 210 True. Up to 5 actions separated by ampersand specified released. order “&” commands/actions in the action field is significant. (Due to the restricted This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 210 of 271...
  • Page 211 SMS text <text> is predefined up to 160 characters using the 7-bit GSM coding scheme. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 211 of 271...

  • Page 212: Supported System Events And States

    <, >, <=, >= , and !=. In such cases use only the comparator =.  Do not change the order of comparators (<= and >=). This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 212 of 271...

  • Page 213: Sys (System States And Events)

    Occurs when the device wakes up from Ring-sleep. Time Occurs when the device wakes up from Timer-sleep. Table 12: Device states and events. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 213 of 271...

  • Page 214: Sys.timer (Timer States And Events)

    (advanced example related to a used trigger). EVENTS-are evaluated just when the event occurs None Table 14: Trigger states and events. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 214 of 271...

  • Page 215: Sys.counter (Counter Events And States)

    Specifies the counter identifier. It can be set to a value from 0 to 19. Table 15: Counter events and states. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 215 of 271...

  • Page 216: Sys.bt (Bluetooth States And Events)

    Occurs when the GPS module of the device is disabled (powered off). Table 18: GPS states and events. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 216 of 271...

  • Page 217: Sys.gsm (Gsm States And Events)

    Occurs when external power is removed/disconnected from the device or input voltage Sys.Power.eDropped falls below 4.2 Volt. Table 20: System power states and events. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 217 of 271...

  • Page 218: Sys.bat (Battery States And Events)

    Specifies the UserEvent identifier. It can be set to a value from 0 to 9 Table 22: UserEvent states and events. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 218 of 271...

  • Page 219: Display (Display States And Events)

    (option) is pressed. inactive the timeout specified for that dialog box has expired Table 25: Display states and events. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 219 of 271...

  • Page 220: Io (Io States And Events)

    = Call button on the Bluetooth Audio Headset is pressed (supports just short press). = Any button is pressed. Table 27: Button states and events. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 220 of 271...

  • Page 221: Gps (Gps States And Events)

    Occurs when three or less GPS satellites are used. (GPS position goes GPS.Nav.eFix=invalid from valid to invalid). Table 28: Navigation states and events. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 221 of 271...

  • Page 222: Gps.time (Gps Time States And Events)

    It can be set to =, !=, <, >, <= or >=. EVENTS None Table 29: GPS Time states and events. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 222 of 271...

  • Page 223: Gps.history (History States And Events)

    You may configure an alarm that notifies the user to download the history data on the server. Table 30: History states and events. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 223 of 271...

  • Page 224: Gps.geofence (Geofence States And Events)

    If it is omitted, event occurs when the device enters into and leaves a geofence <id> Table 31: Geofence states and events. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 224 of 271...

  • Page 225: Gps.area (Area States And Events)

    - Occurs only when the device enters into the Area <id> outside - Occurs only when the device leaves the Area <id> Table 32: Area states and events. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 225 of 271...

  • Page 226: Gsm (Gsm States And Events)

    Occurs when the device is already connected to the GSM network and it changes the GSM GSM.eCellChange network cell (hand-over). Example: GSM.eCellChange Table 34: GSM Cell states and events This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 226 of 271...

  • Page 227: Gsm.voicecall (Voice Call States And Events)

    +493677XXXX, including country and area code) to be compared. If it is omitted, the event occurs for incoming/outgoing voice call. Table 35: GSM Voice Call states and events. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 227 of 271...

  • Page 228: Gsm.sms (Sms States And Events)

    “.Number=”+493677XXXX””) may occur at the same time, you may combine them within a condition field. Table 36: GSM SMS states and events. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 228 of 271...

  • Page 229: Gsm.datacall (Data Call States And Events)

    +493677XXXX, including country and area code) to be compared. If it is omitted, the event occurs for incoming/outgoing data call. Table 37: GSM Data Call states and events. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 229 of 271...

  • Page 230: Gsm.gprs (Gprs States And Events)

    GSM.GPRS.eDisconnected The GPRS connection between MAMBOII and the GPRS network is broken. Table 38: GPRS states and events. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 230 of 271...

  • Page 231: Tcp (Tcp States And Events)

    The connection to the SMTP server failed, or authentication failed or the operation timed out etc. Table 40: SMTP states and events. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 231 of 271...

  • Page 232: Ieee.keyfob (States And Events)

    (Keyfobs + I/O-BOX) connected to the MAMBOII is limited to 6 from 0 .. 5. Table 42: IOBOX states and events. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 232 of 271...

  • Page 233: Ieee.iobox.In (Input States And Events)

    0 to 12 (number can be <voltage> represented with floating-point notation). EVENTS None Table 44: IOBOX Analogue Input states and events. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 233 of 271...

  • Page 234: How To Test The Falcom Mamboii Using Firmware 2.4.0 And Later

    • Avoid executing of false alarms when TIMER, COUNTER and TRIGGER are in use. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 234 of 271...

  • Page 235: Mamboii

    The following procedure shows the steps you must take to test a simple configuration on the MAMBOII device. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 235 of 271...

  • Page 236: Load The Configuration Into The Mamboii Device

    Connect Keyfob0 to the MAMBOII. The last entry in the following command specifies the MAC address of the Keyfob, which is unique to each Keyfob. (This This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 236 of 271...

  • Page 237: Run The Test

    3. If the first test has been done successfully, take your Keyfob that is already connected to the MAMBOII device and perform a short-press on the Button 1 (BTN1), the LED 1 on the Keyfob will go flashing as follow ON = 1000 msec and OFF = 500 msec.

  • Page 238: How To Connect An I/O-Box Device To The Mamboii

    4. Later on, set your headset into the pairing mode (for more details, refer to the User's manual of the headset and find out how to set the headset into the pairing mode). This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 238 of 271...
  • Page 239 MAMBOII-device ➍ when the event “BT.Audio.sConnected will be displayed on the Console1 ” This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 239 of 271...

  • Page 240: Tcp Server Communication

    TCP connection can be performed ) Enter the SIM PIN: SETUP $PFAL,GSM.PIN=1111 (for example) Enter the PIN of the used SIM card (your SIM card inserted into the MAMBOII device which is COMMENT supplied by your GSM operator or retailer) and not 1111. Table 39:...

  • Page 241: Using The Mamboii Device As Real-Time Navigation System

    Please remember that: Safety to traffic has always priority! Please use the MAMBOII only in such a way that you always keep control of your vehicle in all traffic conditions. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 241 of 271...

  • Page 242: How To Send Sms Message To The Mamboii Device

    The text entered behind the prompt ">" will be recognized by the MAMBOII device as an input message. Example: AT+CMGS=012345678 > $PFAL,Cnf.Set,DEVICE.NAME=”myMAMBOII”<ctrl+z> > $PFAL,Cnf.Set,AL0=Sys.BTN.e0=short:GSM.SMS.Send,“+491234567“,8,“test“<ctrl+z> This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 242 of 271...

  • Page 243: Appendix

    Used to report the current GPS longitude value in nautical coordinates. Format: is e.g. Lon.n 010E58’50 for east, 10°58‘50“. Used to report the current GPS latitude value in decimal degrees. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 243 of 271...
  • Page 244 Used to request the text of last incoming SMS. No value will be shown if there was no SMSText SMS received after the system has been started. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 244 of 271...

  • Page 245: Supported Protocols

    Requests the last valid GPRMC protocol (see GPRMC). 0x400 used for test purposes – GPDAT protocol Table 46: Supported protocols. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 245 of 271...

  • Page 246: Supported Character Sets

    This way you can write, for example, short messages, which may contain differently coded characters. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 246 of 271...

  • Page 247: Gsm Alphabet Tables And Ucs2 Character Values

    (exclamation mark) 0x022 "  " "  " "  (double quote) 0x023    (number sign) This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 247 of 271...
  • Page 248 0x049   0x04A   0x04B   0x04C   0x04D   0x04F   This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 248 of 271...
  • Page 249 Ü Ü (caret/cirumflex)    0x05E  § §   (underscore) 0x060  ¿ ¿  This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 249 of 271...
  • Page 250 This code is an escape to the following extension of the 7-bit default alphabet table. This code is not a printable character. It shall be treated as the accompanying control character. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 250 of 271...

  • Page 251: Nmea Messages Transmitted/Selected By/On Mamboii Device

    ASCII text in quotation marks. <CR><LF> Carriage return and line feed. Table 49: Description of NMEA output messages This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 251 of 271...

  • Page 252: Gpgga Message

    Magnetic variation (degrees) Magnetic variation direction (W/E) Checksum End of message termination <CR><LF> Table 51: The GPRMC message data format. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 252 of 271...

  • Page 253: Gpgsv Message

    10.0 Vertical dilution of precision Checksum <CR><LF> End of message termination Table 53: The GPGSA message data format. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 253 of 271...

  • Page 254: Gpvtg Message

    Position validity (A: valid, V: invalid or S*: invalid) Checksum <CR><LF> End of message termination Table 55: The GPGLL message data format. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 254 of 271...

  • Page 255: Gpiop Message

    Cell ID Checksum <CR><LF> End of message termination Table 58: The GPGSM message data format in GMS status mode. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 255 of 271...

  • Page 256: Gparea Message

    0..15=course (16 bit) 0..15 360°] with resolution of 0.01 Table 60.1: The <binary protocol> in bitwise data format. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 256 of 271...

  • Page 257: How To Convert The Coordinates

    25.2 km/h 111.6 km/h 457.2 km/h 457.2 km/h Satellites in view <15 - <15 - <15 - <15 - This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 257 of 271...
  • Page 258 163815 109215 67215 Records Table 61: Maximum values & the time the history space will be used up. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 258 of 271...

  • Page 259: Mamboii Communication Modes And Their Functionality

    (as represented in diagram attached below). Figure 13: Supported communication modes and their functionality This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 259 of 271...

  • Page 260: Default Settings Of The Firmware Version 2.4.0

    Protocol default settings PROT.GGA PROT.GSA PROT.GSV PROT.RMC PROT.GLL PROT.VTG PROT.IOP PROT.GSM PROT.BIN PROT.AREA PROT.START.BIN GSM default settings This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 260 of 271...
  • Page 261 See sub-sections in the section 3.2.10, page respectively. ALIAS.CNF Config Table 62: Default settings of the firmware version 2.4.0 and greater. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 261 of 271...

  • Page 262: Buttons And Leds Designation Of The Keyfob Corresponding To The Firmware Version 2.4.0

    BTN.e3 BTN4 BTN.e4 Headset BTN5 BTN.e5 this button awakes MAMBOII unit from IGN sleep. Table 63: Buttons designations This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 262 of 271...

  • Page 263: Pin Designations For The 16-Pin Molex And 8-Pin Connector Of The I/O-Box

    The complete pin out is given in the I/O-BOX hardware manual (currently in preparation) Table 64: Pin designations for the 16-pin MOLEX and 8-pin connector. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 263 of 271...

  • Page 264: Mamboii Configuration Examples

    6.11.1.3.2 Refuse voice calls after the second ring Example AL0=GSM.VoiceCall.sRingCounter>=2:GSM.VoiceCall.Hangup Comment This alarm can be used to reject any voice call, after second ring. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 264 of 271...

  • Page 265: Csd (Data Calls)

    To check the speed (the value “>=40” can be modified) of the device within a specific area, use the configuration of the AL3. 6.11.3.2 Trigger 6.11.3.2.1 Save and load important trigger states AL0=Sys.Device.eStart:Sys.Trigger0=load2 Example AL1=Sys.Device.eShutdown:Sys.Trigger0=save2 This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 265 of 271...

  • Page 266: Counter

    Example position:“ If the current position of the MAMBOII is at least 1000 metres away from position 0 THEN store the current Comment position of the device into position 0 AND send a SMS including the text “current position:“ and the current position to the “+491234567“...

  • Page 267: Time Based History Entries

    AL2=SYS.Timer.e0:GPS.History.Write,0,““ AL3=GPS.History.sDist>=500:GPS.History.Write,0,““&SYS.Timer0.start The AL0 initiates a cyclic timer, once the MAMBOII gets a GPS-fix. The AL1 stops the used timer, once the obtained GPS-fix fails (The AL1 prevents the history from unnecessary entries, It stops occurring of events set in the AL2).

  • Page 268: Special Consideration When Using Firmware Features

    This behaviour assures, that important information ca not get lost due to bad GSM coverage. Usually Sending commands „just“ enqueue the This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 268 of 271...

  • Page 269: Sms Send

    1,0,0,0,0,0 USERNAME (optional) ""(None) "eplus" ""(None) PASSWORD (optional) ""(None) ""(None) ""(None) Table 65: Service provider information, valid 16.10.2001 This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 269 of 271...

  • Page 270: Used Abbreviations

    GIS field data collection, it is unnoticeable. A PDOP reading of 2-5 is typical. Packet Data Protocol Point to Point Protocol This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 270 of 271...
  • Page 271 Prime meridian and the Equator and the Y-axis is rotated 90 degrees East of the X-axis about the Z-axis. Table 67: Used abbreviations. This confidential document is a property of FALCOM and may not be copied or circulated without previous permission. Page 271 of 271...

Table of Contents