Gsm" Command Type; Gsm" General Command Indices; Gsm.pin=<"Pin"> - Enters The Pin Number Of The Used Sim Card; Gsm.puk=<"Puk">,<"Pin"> - Enters The Puk And Pin Numbers Of The Used Sim Card - FALCOM MAMBOII User Manual

C C
ONFIGURATION OMMAND

3.2.5 "GSM" command type

3.2.5.1
3.2.5.1.1
Command syntax
Examples
Responses
Command description
This command enters the PIN code of the used SIM card. See also the description in
chapter 3.2.20.1, page
Parameter Description
<"pin">
It specifies the PIN number of the used SIM card, wrapped in quotation marks.
This may be for example the SIM PIN to register onto the GSM network, or the SIM
PIN to replace the current PIN number with a new one.
available.
3.2.5.1.2
Command syntax
Examples
Responses
Command description
This command unblocks the SIM card by entering the associated PUK code.
Parameter Description
<"puk">
Entering incorrect PIN three times, the SIM card will be blocked. To unblock it,
you have to enter the PUK code of the used SIM card, wrapped in quotation
marks (" "). After ten failed attempts to enter the PUK, the SIM card will be
invalidated and no longer operable. In such a case, the card needs to be
replaced. PIN consists of
<"pin">
It specifies the PIN number of the used SIM card, wrapped in quotation marks ("
").
3.2.5.1.3
Command syntax
Examples
Responses
Command description
This command returns the serial identification number of the target device.
Parameter Description
None
This confidential document is a property of FALCOM and may not be copied or circulated without previous permission.
S - F R
ET IRMWARE

"GSM" general command indices

GSM.PIN=<"pin"> - Enters the PIN number of the used SIM card
$PFAL,GSM.PIN=<"pin">
$PFAL,GSM.PIN="1111"
176 for more details.
GSM.PUK=<"puk">,<"pin"> - Enters the PUK and PIN numbers of the
used SIM card
$PFAL,GSM.PUK=<"puk">,<"pin">
$PFAL,GSM.PUK,"22222222","1111"
-
to
4 8
GSM.IMEI – Gets the serial identification number of the device
$PFAL,GSM.IMEI
$PFAL,GSM.IMEI
e.g $IMEI:357023000327552
2.4.0_ -
EVISION BETA
digits, PUK is an 8-digit code only.
V 1.0.0
ERSION
to digits are
4 8
Page 101 of 271