Supported Protocols - FALCOM MAMBOII User Manual

C C
ONFIGURATION OMMAND
GPRSOnline
GPRSTraffic
GPRS
TCP
TCPClientOnline
TCPClient
TCPText
IEEE
Keyfob
ANA<index>

6.3 Supported protocols

Following are listed the protocols in the hexadecimal format. Specify a without leading
"0x". The protocol syntax is affected from the T configuration. For more details about the
format of the supported protocols refer to the chapter 6.5.1, page 251.
Protocols
In hex format
0x01
0x02
0x04
0x08
0x10
0x20
0x40
0x80
0x100
0x200
0x400
This confidential document is a property of FALCOM and may not be copied or circulated without previous permission.
S - F R
ET IRMWARE
Used to report information on the supported GPRS service states. It returns the current
state of GPRS attachment. If MAMBOII has already been GPRS attached the value is 1,
otherwise 0.
Used to report the complete GPRS traffic information. For example: (if GPRS is
deactivated).
$traffic after 00.00.0,00:00:00 :0 kB (0 Bytes) I:0 kB (0 Bytes) O:0 kB (0 Bytes)
Used to report the current GPRS state of the device
Used to report whether or not the MAMBOII device has already established a TCP
connection to the remote server. If system MAMBOII TCP connected, the value is 1,
otherwise 0.
Used to report the TCP state of the device
Used to report the contents of the last received TCP packet
Available on the next revision.
Used to report the current voltage of the analog inputs on the I/O-BOX devices.
The <index > determines the index of the analog inputs to be requested. Each I/O-BOX
device provides 2 analog inputs. There can be up to 6 I/O-BOX devices connected to the
MAMBOII. The <index
analog inputs on 6 I/O-BOX devices.
The following lists the index of the analog inputs corresponding to the I/O-BOX devices.
4, 5 I/O-BOX0 (e.g.ANA4 means the fist analog input on the I/O-BOX0)
6, 7 I/O-BOX1
8, 9 I/O-BOX2
10, 11 I/O-BOX3
12, 13 I/O-BOX4
14, 15 I/O-BOX5
Table 45: Supported dynamic entries.
Meaning
Requests GPGGA message
Requests GPGSA message
Requests GPGSV message
Requests GPRMC message
Requests GPGLL message
Requests GPVTG message
Requests GPIOP message
Requests GSM message (about its format see chapter GPGSM)
Requests user message
256)
Requests the last valid GPRMC
used for test purposes –
Table 46: Supported protocols.
2.4.0_ -
EVISION BETA
> can be set to a value from 4 to 16 corresponding to the 12
BIN protocol (see chapters
protocol (see GPRMC).
GPDAT protocol
V
ERSION
3.2.19.2 page 175 and 6.5.1.10
Page 245 of 271
1.0.0
page